816482

Carat SL-1505 DUSTEC Manual

31
Zoom out
Zoom in
Previous page
1/84
Next page
31
GB
down and the load warning light will be lit solid red. In this case, the motor must be restarted by turning the
switch OFF and then back ON.
Overheat Thermal Protection:
If the temperature of the motor gets too high, the thermal protection will shut the motor down and the load
warning light will be lit solid red. The motor must be restarted by turning the switch OFF and then back ON.
When this happens, do not immediately put a load on the motor after restarting. Always run the machine at no
load for a few minutes to return to a normal operating temperature before continuing.
CAUTION: The motor will be damaged if it is repeatedly overloaded or overheated.
Always cool the motor by running at no load for a few minutes whenever it stops
from either overheat or overload.
HOW TO USE THE TOOL
Effective control of this powerful saw requires two-handed operation for maximum protection. Hold the saw
firmly WITH BOTH HANDS to prevent loss of control which could cause personal injury.
SIGHTING NOTCHES
The sighting notches at the front of the machine show the operator the
line of cut. The innermost notch indicates the line of the inner blade.
Use the inner notch as a reference point as it will not change with
different channel width settings. The outermost notch shows the line
of the outer blade at widest setting. The central notch shows the outer
line of a 26.5mm channel width.
OPTIONAL GUIDE RAIL
The optional guide rail helps keep the cutting line perfectly straight. The machine has slots built into the base
which engage with he guide rail. To mount the guide rail on the wall, wedge the ends of the guide rail supports
to the floor and ceiling and tighten the thumb screws. The cutting line will be 32.5mm from the edge of the
guide rail.
NOTE: To avoid binding of the plunge release mechanism, first relax the downward
pressure on the machine while squeezing the plunge release lever to allow it to
release normally
Inner Blade Notch
Outer Blade Notch
(at central setting)
Outer Blade Notch (at widest setting)
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat SL-1505 DUSTEC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat SL-1505 DUSTEC in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian as an attachment in your email.

The manual is 3.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info