816482

Carat SL-1505 DUSTEC Manual

28
Zoom out
Zoom in
Previous page
1/84
Next page
28
GB
recommends that this tool NOT be modified and/or used for any application other than for which it was
designed. If you have any questions relative to its application DO NOT use the tool until you have written
the manufacturer and have been advised.
17. Only use the machine for dry cutting in stone, concrete or masonry.
18. Use the auxiliary handles supplied with the tool. Loss of control can cause personal injury.
19. Use a residual current device (PRCD) (not included) to protect from current surges.
20. Keep power supply cord clear from the working range of the machine. Always lead the cable away
behind you.
21. Immediately switch off the machine if unusual vibrations or if other malfunctions occur. Check the
machine in order to find out the cause.
22. Only use and store diamond blades according to the Manufacturer’s instructions.
23. Pay attention to the dimensions of the blades. The diameter of the center bore must engage the arbor
without play. If not use any necessary reduction pieces or adapters (supplied with the blade) to ensure a
proper fit.
24. Take care to avoid hidden electric lines, gas and water pipes. Check your working area, e.g. with a
metal detector before commencing work.
25. The dust that arises when working with this tool can be harmful to health. Use a dust absorption
system and wear a suitable dust protection mask and remove deposited dust with a vacuum cleaner.
ELECTRICAL CONNECTION
The network voltage must conform to the voltage indicated on the tool name plate. Under no circumstances
should the tool be used when the power supply cable is damaged. A damaged cable must be replaced
immediately by an authorized Customer Service Center. Do not try to repair the damaged cable yourself. The
use of damaged power cables can lead to an electric shock.
INTRODUCTION
This saw is designed exclusively for the creation of masonry grooves (parallel double cuts in concrete, masonry
and stone) for the purpose of placing water, electric or gas conduits. The machine is designed to use a pair
of parallel diamond blades (not included) . This machine should not be used for cutting other materials. The
machine should not be converted or modified, e.g. for any other form of use, other than as specified in these
operating instructions. The user shall be liable for damages and accidents due to incorrect use.
UNPACKING
Carefully remove the tool and all loose items from the container. Retain all packing materials until after you
have inspected and satisfactorily operated the machine.
NOTE: An appropriate dry diamond blades (not included) must be mounted to the machine before
operating.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat SL-1505 DUSTEC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat SL-1505 DUSTEC in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian as an attachment in your email.

The manual is 3.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info