816482
27
Zoom out
Zoom in
Previous page
1/84
Next page
27
GB
SPECIFIC SAFETY RULES
1. Keep hands away from cutting area and blade at all times! Keep your second hand on an auxiliary
handle. If both hands are holding the saw, they cannot be cut by the blade.
2. Do not reach underneath the work.
3. Hold tool by insulated gripping surfaces when performing an operation where the cutting tools
may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of
the tool “live” and shock the operator.
4. Always use blades with correct size and shape arbor holes. Blades that do not match the mounting
hardware of the saw will run eccentrically, causing loss of control.
5. Never use damaged or incorrect arbor flanges or bolts. The arbor flanges and bolt were specially
designed for your saw, for best performance and safety of operation.
6. Maintain a firm grip on the saw and position your body and arm in a way that allows you to resist
KICKBACK forces. KICKBACK forces can be controlled by the operator, if proper precautions aretaken.
7. Do not use a dull or damaged blade.
8. Use only recommended blades, rated at the machines maximum rated RPM or higher with correct arbor
hole.
9. Tighten blade retaining bolt and all clamps before operating.
10. Check the inside surfaces of the arbor flanges as well as the sides of the blade for freedom from any
foreign matter.
11. Check the blade for cracks or other damage before operation. Replace cracked or damaged blade
immediately. Carry out a test run without load for at least 30 seconds before use.
12. Never start the tool with the workpiece against the blade.
13. Allow the motor to achieve full speed before cutting.
14. Important: After completing the cut, release power switch and wait for coasting blade to stop
completely before putting the saw down
15. Never operate the tool in an area with flammable solids, liquids, or gases. Sparks from the commutator/
carbon brushes could cause a fire or explosion.
16. There are certain applications for which this tool was designed. The manufacturer strongly
.....wear safety-approved hard hat
......Keep hands clear – pinching hazard.
DANGER! Keep hands away from cutting area and the
blade.
rotating parts - entanglement hazard. Keep
hands, loose clothing and long hair away
from moving parts
do not dispose of electric tools, accessories and
packaging together with household waste material
......warning of general danger
….class II tool
.......read these instructions
......always wear eye protection
......always wear a dust mask.
.....always wear hearing protection
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat SL-1505 DUSTEC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat SL-1505 DUSTEC in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian as an attachment in your email.

The manual is 3.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info