816480

Carat SL-1253N DUSTEC Manual

15
Zoom out
Zoom in
Previous page
1/44
Next page
15
ENGLISH
In the following table the amount and width of the spacers
are given.
Spacer Amount Width (mm)
I 1 6
II 2 9
III 1 12
The slot widths in the subjoined table apply when by Carat
advised diamond grinding wheels with a width of 2,4mm
are mounted.
The following combinations of spacers between the dia-
mond grinding wheels will result in the corresponding slot
widths.
For example, when 1x spacer I and 2x spacer II is mounted
this will result in a 28mm slot width (the various spacer
widths + the width of diamond grinding wheels).
Combination of spacers Slot width (mm)
I II III
1 10
1 13
1 16
1 1 19
2 22
1 1 25
1 2 28
1 1 1 31
2 1 34
1 2 1 40
Regardless of the requested slot width, ALL supplied spa-
cers must be mounted. Otherwise, the diamond grinding
wheels can become loose during operation and lead to
injuries.
At least one spacer must be mounted between two dia-
mond grinding wheels.
When mounting the diamond grinding wheels, make sure
the direction of the arrow on the diamond grinding wheels
matches the direction of the arrow on the guard and ex-
traction hood (the arrow is stated on the cover).
• Mount the spacers and diamond grinding wheels in the
requested order on the mounting ange.
• Mount the locking ange, with the bushing pointing the
diamond grinding wheels, on the mounting ange.
• Screw the clamping bolt into the mounting ange.
• Block the locking ange and tighten the clamping bolt
with aid of the wrench.
• Close the inner guard and place the cover on the guard
and extraction hood. Mind the diamond grinding wheels
to prevent injuries.
• Tighten the depth locking (at a random position).
• Tighten the three cylindrical screws of the cover with aid
of a screwdriver.
Always select a type of diamond grinding wheels suitable
for the specic material to be grinded. We advise diamond
grinding wheels from Carat. Observe the manual of the
diamond grinding wheels.
Make sure the diamond grinding wheels are rotating in the
correct direction. Verify the direction of the arrow on the
diamond grinding wheels is corresponding the direction of
the arrow on the power tool.
Always change the diamond grinding wheels as a couple.
Use in a couple the same type of diamond grinding wheels.
Dismounting and mounting of the diamond grinding
wheels
To change the diamond grinding wheels the guard and ex-
traction hood must be swiveled out. Place the power tool
on a rm surface.
Tighten the depth locking (at a random position) to avoid
unexpected swiveling of the inner guard.
E
A
E
CD
B
• Loosen the three cylindrical screws which mount the co-
ver [2] on the guard and extraction hood [1] with aid of
a screwdriver.
• Loosen the depth locking [14] while holding the cover.
• Remove the cover from the guard and extraction hood.
Due removing the cover the inner guard will swivel
further open.
• Block the locking ange (C) and loosen the clamping bolt
(D) with aid of the wrench [16].
• Unscrew the locking bolt from the mounting ange (A).
• Remove the spacers (B) and the diamond grinding
wheels (E).
• Clean the mounting ange and all parts to be (dis)moun-
ted.
The slot width depends on the quantity spacers between
the diamond grinding wheels and the width of the seg-
ments of the diamond grinding wheels.
With this power tool three di󰀨erent spacers are provided.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat SL-1253N DUSTEC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat SL-1253N DUSTEC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 7.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info