816479
17
Zoom out
Zoom in
Previous page
1/80
Next page
17
ENGLISH
2.3 ResponsibilitiesofOperator

An operator is every natural or legal person, who uses the
machine or delegates its use to others and is responsible
for the safety of the user, personnel or third parties in the
course of such use.

The machine is used in the commercial sector. Therefore,
the operator of the machine is subject to statutory obli-
gations regarding occupational safety. The operator, in
particular, must:
- Be informed about current occupational safety regula-
tions.
- Determine, through hazard evaluation, any potential ad-
ditional dangers resulting from specific usage conditions
at the site of the machine operation.
- Check regularly throughout the service life of the
machine, whether the operating instructions drawn up
by the operator are in line with the current status of rules
and regulations.
- Exercise control of the competence for installation,
operation, maintenance and cleaning of the machine
in a clear and unambiguous manner. Make sure that
all personnel involved with the machine have read
and understood the operating instructions. Moreover,
the personnel must undergo training in handling the
machine at regular intervals and be informed about
potential dangers.
- Provide the persons appointed for operating the
machine with the prescribed and recommended
protective.
- Moreover, the operator is responsible for ensuring that
the machine is always in a technically perfect condition.
- Is maintained according to the specified maintenance
intervals, and that all safety mechanisms of the
machine are regularly controlled for completeness
and functionality.
2.4 Personnelrequirements

Any operation with the machine may only be carried out
by the persons, capable of performing their work properly
and reliably and meet every requirement mentioned.
- No works can be carried out by the persons, whose
response capability is aected, e.g., by drugs, alcohol or
medicines.
- When deploying personnel at the site of operation,
always adhere to the applicable occupational and
age-specific regulations.


Improper operation can result in significant personal and
material damage.
Any operations must be only carried out by the persons
having required training, knowledge and experience.

As a matter of principle, all works on the electrical
installations must be carried out by qualified electricians.
2.5 Personalprotectiveequipment
Wearing personal protective equipment is required during
the work.
1. Helmet with ear protectors.
2. Visor or protective goggles.
3. Dust mask / respirator.
4. Safety gloves.
5. Suitable protective clothing.
6. Protective footwear.

It is prohibited to wear protective gloves near
rotating parts, which pose the danger of pinching. Here,
danger created by wearing protective definitely surpasses
the intended protection.
2.6 Risico’s
The machine has undergone a risk review. Wherever
possible, the identified dangers were eliminated and risks
reduced.
Nevertheless, the machine poses residual risks described
in the following section.
- Strictly observe warnings and safety instructions spec-
ified here and in the chapters about handling to avoid
potential damage to health and dangerous situations.
2.7 ResidualRisks


Reaching into rotating tools may lead to heavy injuries.
- Do not touch rotating diamond blades in any
circumstances.
- Never work without diamond blade guard.
- Only work with diamond blade guard closed.
- Only remove clippings with diamond blade stopped.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat MultiCoup 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat MultiCoup 350 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 14.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info