816479

Carat MultiCoup 350 Manual

16
Zoom out
Zoom in
Previous page
1/80
Next page
16
 
1.1 OperatingManual
This operating manual provides guidance on safe and ei-
cient operation and should form a basis of any actions in-
volving the machine. It is an integral part of the machine,
which should be kept in the immediate vicinity accessible
for its operating personnel. Prerequisite of safe operation
is adherence to all safety and handling instructions.
Therefore, before starting any work, the personnel must
read carefully and understand the operating manual.
Moreover, the accident prevention regulations applicable
at the site of the machine operation and general safety
regulations must be complied with.
1.2 Explanationofsymbols

Warnings and safety instructions in the manual are
indicated with the pictograms and provided in blocks
highlighted in grey and yellow.

... draws attention to an immediate danger that, if
not avoided, may result in heavy or even fatal injuries.

... draws attention to potentially dangerous situa-
tions that, if not avoided, may result in material damage.
... marks danger due to electric current.
Failure to observe the safety instructions leads to
danger of heavy or fatal injuries.
... marks danger of crushing.
Failure to observe the safety instructions leads to
danger of heavy injuries from moving parts.
... marks danger due to hot surface.
Failure to observe the safety instructions leads to
danger of burns and heavy skin injuries caused by heat.
... marks danger from moving diamond blades.
Failure to observe the safety instructions leads to danger
of cuts and heavy skin injuries caused by rotating dia-
mond blades.
1.3 Liabilitylimitation
All data and instructions provided in this manual were
compiled with consideration of applicable standards
and regulations, state of the art in this field and our
long-standing insights and experience.
The manufacturer accepts no liability for damages
caused by:
- Non-observance of the Operating manual.
- Unintended use.
- Employment of unskilled and uninstructed personnel.
- Unauthorized conversions.
- Technical changes.
- Use of non-approved spare parts.
The responsibilities agreed in the delivery contract,
the General Terms and Conditions as well as the delivery
conditions of the manufacturer and the statutory
regulations valid at the time of the conclusion of the
contract shall apply

The manufacturer guarantees the functional capability of
the applied process technology and performance param-
eters identified. The warranty period commences with the
defect-free delivery.

12 months aer delivery of mechanical and electrical
components for one-shi operation, except for the wear
parts and tools.
The warranty claim expires, if the system was not installed
and started up by our experts.
The warranty extends to the replacement parts.
Consequential damages are excluded.
Damage caused by natural wear, deficient of improper
maintenance, failure to comply with the operating
regulations, excessive loads and use of inappropriate
equipment shall be excluded from the warranty.
 
2.1 Intendeduse
This MultiCoup 350 machine is designed exclusively for
the following purposes in the commercial sector: Dry
and wet cutting of the solid construction materials such
as: Clinker, bricks, concrete block products, refractory,
natural and artificial stone products as well as tiles and
ceramics.
- Any claims for damages resulting from unintended
use are excluded.
- The operator alone is responsible for all damages due
to unintended use.
2.2 Rationallyforeseeablemisuse
Any use of the machine going beyond the intended one,
shall be deemed unintended and thus prohibited
This also applies to:
- Cutting any materials other than presented.
- Cutting without or with open diamond blade guard.
- Removal of clippings in pendulum cutting procedure
(vertical plunging into clippings from above).
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat MultiCoup 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat MultiCoup 350 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 14.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info