816478
16
Zoom out
Zoom in
Previous page
1/52
Next page
16
Keep your workplace clean. Blends of materials are
particularly dangerous. Dust from light alloys can
burn or explode.
Never leave the power tool before It has come to a
complete stop. Cutting tools that are still running
can cause injuries.
Do not use the power tool with a damaged cord. Do
not touch the damaged cord and pull the plug from
the outlet when the cord Is damaged while working.
Damaged cords increase the risk of an electric shock.
Connect power tools that are used in the open via a
ground fault circuit interrupter (GFCI).
Never stand on the power tool. Serious injuries
could occur when the power tool tips over or when
accidentally coming into contact with the diamond blade.
Use the power tool only for dry cutting. Water
penetrating into a power tool increases the risk of an
electric shock.
Keep hands away from the cutting area while the
machine is running. Danger of injury when coming
into contact with the diamond blade.
Never remove cutting remainders, metal chips, etc.
from the cutting area while the machine is running.
Always guide the tool arm back to the neutral position rst
and then switch the machine o.
Guide the diamond blade against the workpiece
only when the machine is switched on. Otherwise,
there is danger of kickback, when the diamond blade
becomes wedged in the workpiece. Operate the power tool
only when the work area to the workpiece is clear of any
adjusting tools, metal chips, etc. Small pieces of metal
or other objects that come in contact with the rotating
diamond blade can strike the operator with high speed.
Always firmly clamp the workpiece. Do not cut
workpieces that are too small to clamp. Otherwise,
the clearance of your hand to the rotating diamond blade
is too small.
Pay attention that persons are not put In danger
by sparking. Remove any combustible materials in
the vicinity. Sparks develop when cutting metal.
Use the cut o grinder only for cutting materials
mentioned under "Intended Use". Otherwise, the
cut o grinder can be subject to overload.
Do not use damaged, out-of-center or vibrating
diamond blades. Damaged diamond blades cause
increased friction, binding of the diamond blade and
kickback.
Always use diamond blades with correct size and
shape of arbor holes. Diamond blades that do not
match the mounting hardware of the cut o grinder will
run eccentrically, causing loss of control.
Do not touch the diamond blade aer working
before it has cooled. The diamond blade becomes
very hot while working.
Make sure that the blade guard operates properly
and can move freely. Never clamp the blade guard
in place while retracted.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat EasyCoupCompact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat EasyCoupCompact in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 3.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info