816478
14
Zoom out
Zoom in
Previous page
1/52
Next page
14
. OPERATION
4.1 Transport Safety lock
Before any work on the power tool itself, pull the
main plug. The transport safety-lock 6 enables
easier handling of the power tool when transporting to
various working locations.
4.2 Releasing the Machine (Working Position)
- Push the tool arm downward by the handle 1
to releave the load on the transport safety-lock 6.
- Pull the transport safety-lock 6 completely outward.
- Guide the tool arm slowly upward.
Note: When working, pay attention that the transport
safety-lock is not pushed inwards. Otherwise, the tool arm
cannot be lowered to the requested depth.
4.3 Securing the Machine (Transport Position)
- Lower the tool arm until the transport safety-lock 6 can
be pushed completely inward.
. STARTING OPERATION
(see figure B)
5.1 Switching On and O
- For starting operation, push the lock-on button 22 in the
direction of the tool arm. Then press the On/O switch 2
and keep it pressed.
Note: For safety reasons, the On/O switch 2 cannot be
locked on but must remain pressed during operation.
- To switch o the machine, release the On/O switch 2.
. WORKING INSTRUCTIONS
Before any work on the power tool Itself, pull
the mains plug.
6.1 General Cutting Instructions
Protect the diamond blade against impact and shock. Do
not subject the diamond blade to lateral pressure.
Do not strain the power tool so heavily that it comes to a
standstill. Excessive feed considerably reduces the perfor-
mance capability of the machine and shortens the service
life of the diamond blade. Use only diamond blades that
are suitable for the material to be worked.
Maximum workpiece dimensions mm
120 x 120
170 x 85
. GENERAL POWER TOOL SAFETY WARNINGS
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury. Save all warnings and instructions for future refer-
ence. The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool
7.1 Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust. Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
7.2 Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce the risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat EasyCoupCompact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat EasyCoupCompact in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 3.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info