816491

Carat A-2600 Manual

38
Zoom out
Zoom in
Previous page
1/60
Next page
38
Connection to a water supply
See graphics pag. 2
Wet drilling needs insertion of water into the core drill motor.
• use only the water pipe provided with your core drill motor. The water pipe includes also a valve (C)
and a quick hose connector (D);
• the maximum pressure of incoming water is 4 bar;
• use just clean water;
• prevent water from entering the electric motor or other electrical components;
• check at regular intervals that none of the water system components are damaged. Check in
particular the valve (C), the quick hose connector (D) and the pipe.
Core bit choice
The maximum and minimum core bit diameter is reported on the data plate on your core drill motor. Do
not use core bit with dierent diameter from the one prescribed.
Warning: for your safety do not use dierent core bits from the ones prescribed for your specific
application
The core bit is dierent depending on the material to be drilled: consult your dealer about the correct
core bit for your application. The not suited core bit or a core bit not sharp can overload the motor
leading to: damage to the motor, long drilling time and excessive diamond segments wearing.
Diamond core bit mounting and replacement
See graphic B pag. 3
Follow these directions
• before mounting or removing the core bit (F) always unplug the core drill motor;
• lubricate the core bit and the core bit spindle thread in order to make easier, aer use, to remove the
core bit;
• if you your core bit connection doesn’t match the core bit spindle (ex. 1/2 G), use a proper adapter
available among accessory;
• if available interpose a quick release device (E) between the core bit spindle and the core bit
• before starting to drill make sure that the core bit is firmly screwed on the core bit spindle.
Stand
Warning: for your safety, make sure that the drill stand you are using is compatible with the diameter of
the core bit and that it is compatible with the power of your core drill motor, shown on the data plate.
The minimum number of bolts you must use to fasten your drill motor is written on the Technical Data
sheet.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat A-2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat A-2600 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info