816491

Carat A-2600 Manual

37
Zoom out
Zoom in
Previous page
1/60
Next page
ENGLISH
37
Preliminary operations
In order to prepare your core drill to operate, follow these steps. Before proceeding with the preparation
make sure that the plug is disconnected from the electricity network.
• follow the instructions given by the stand manufacturer for fastening the stand to the material to be
drilled;
• follow the instructions given by the stand manufacturer for mounting your core drill motor to the
stand;
Follow these instructions:
See fig C pag. 3
• if you want to operate in wet mode, connect the hosepipe to the core drill motor as explained in the
Water insertion paragraph. Make sure that the water valve is shut;
• if your core drill is equipped with a gear change (A), see the data plate on your core drill motor as
shown. Identify the right rotating speed according to the diameter of the core bit you are using.
Select the required gear change position just when the motor is at standstill;
• refer to the following paragraph Diamond core bit mounting and replacement in order to mount the
core bit to your core drill.
Safety systems
See fig E pag. 4
• your core drill motor is equipped with a safety portable residual current device (PRCD) assembled on
the cord.
• never use core drill without PRCD;
• before starting to work make sure the PRCD works properly. In order to do so, plug the core drill
motor in and press the green button Reset (I)): a red led will light up (H) showing that electricity is
available to the core drill. Then press the blue button Test (J) that tests if the device works properly.
When you press it the circuit breaker inside the PRCD should cut the power o leading the switch
automatically to go to the o position and the red led to go o;
• if, when working, the PRCD cuts the power: stop working, set the switch on OFF position and bring
your core drill to an authorized service centre in order to remove the causes of the electrical fault.
ON/OFF switch
See fig D pag. 4
Refer to figure D in order to understand how to use the on/o switch:
Warning: for your safety, you must get familiar with the switch in order to understand how you can
switch the machine o in case of emergency.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat A-2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat A-2600 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info