709292
205
Zoom out
Zoom in
Previous page
1/231
Next page
205
Troubleshooting
Changing between recording (
Ü
REC) and record standby (STBY) takes longer than usual.
-When the SD card contains a large number of clips, some operations may take longer than usual. Save your clips
(A 151) and initialize the card (A 35). Alternatively, replace the card.
The camcorder cannot record to the SD card properly.
-This may occur as recordings are made and deleted over time. Save your clips (A 151) and initialize the card (A 35).
After using the camcorder for a long time, it becomes hot.
- The camcorder may become hot after using it continuously for long periods of time; this is not a malfunction. If the
camcorder becomes unusually hot or it becomes hot after using it only for a short while, it may indicate a problem with
the camcorder. Consult a Canon Service Center.
Playback
Cannot delete a clip.
- The clip may have an $ mark. Remove the $ mark (A 139).
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
Deleting clips takes longer than usual.
-When the SD card contains a large number of clips, some operations may take longer than usual. Save your clips
(A 151) and initialize the card (A 35).
Cannot copy clips.
-There is not enough available space on the destination card or the card already contains the maximum number of clips
(999 clips). Delete some clips (
A
140) to free some space or replace the card.
Cannot delete a photo.
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
-Photos that were protected using other devices cannot be deleted with the camcorder.
Indicators and Onscreen Displays
appears in red on the screen.
- The battery pack is exhaus ted. Replace or charge the battery pack.
í
appears on the screen.
- The camcorder cannot communicate with the battery pack attached so the remaining battery time cannot be
displayed.
The tally lamp does not illuminate.
- Set > [$ System Setup] > [LED] > [Tally Lamp (Front)] or [Tally Lamp (Rear)] to [On].
The tally lamp flashes quickly. (4 flashes per second)
- The battery pack is exhaus ted. Replace or charge the battery pack.
-There is not enough available space on the SD card. Delete some clips (A 140) to free some space or replace the
selected card.
-A system error has occurred. Turn the camcorder off and then on again. If this does not solve the problem, consult a
Canon Service Center.
The tally lamp flashes slowly. (1 flash per second
)
- The combined available space on both cards is low. Replace the card that is not being recorded onto.
/ appears in red on the screen.
- A card error occurred. Remove and reinsert the card. If the display does not change back to normal, save your
recordings (A 151) and initialize the card (A 35).
6/7 (in red) and [END] appear on the screen.
-The SD card is full. Use a different card or delete some clips (A 140) to free some space on the card.
Even after stopping recording, the access indicator stays illuminated in red.
-The clip is being recorded on the card. This is not a malfunction.
b
appears in yellow on the screen.
-The camcorders internal temperature has reached a predetermined level. You can continue using the camcorder.
205


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon XF705 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon XF705 in the language / languages: English as an attachment in your email.

The manual is 17,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon XF705

Canon XF705 User Manual - German - 238 pages

Canon XF705 User Manual - Dutch - 229 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info