543639
205
Zoom out
Zoom in
Previous page
1/240
Next page
205
Troubleshooting
A
pp
endix Other Information
The Projected Image Is Blurred
You Cannot Project an Image Appropriately
The Projector Power Turns Off
Cause Countermeasure
The image is out of focus. Adjust the focus. (P73)
The distance to the screen is too
short.
Check whether the distance to the screen is appropriate. If
the distance is shorter than approximately 1.3 m (4.3'), the
projector cannot focus on the screen. (P156)
The projector is not placed
straight in front of the screen.
Check whether the projector is placed obliquely to the
screen. A slight error in the projection angle can be cor-
rected through the keystone adjustment function. (P76)
The projector has been moved to
a place where the temperature
varies a lot.
When the projector is moved from a location where the tem-
perature is low to a location where the temperature is high,
condensation may form on the lens. The condensation will
evaporate after a period of time and the projector will be
able to project a normal image.
The lens is stained. Clean the lens. (P192)
The tracking is bad. Adjust the tracking with the [AUTO PC] or [Tracking] func-
tion. (P62, P96)
Cause Countermeasure
The projected image is inverted in
the vertical or horizontal direction.
The ceiling mounted / rear projection setting is incorrect.
Check the [Image flip H/V] setting in the [Display settings]
menu. (P104)
The dot clock of the input signal is
higher than 162 MHz with a BNC
cable.
Set the signal dot clock to 162 MHz or less on your com-
puter.
A VGA cable is used in which
some pins are not connected.
Use a VGA cable in which all pins are connected.
Cause Countermeasure
The air intake or exhaust vent is
blocked.
Check whether the air intake or exhaust vent is blocked. If
the air intake or exhaust vent is blocked, the temperature
inside the projector will increase and the power is automati-
cally turned off to protect the projector. (The [WARNING]
indicator and [TEMP] indicator are lit.) Wait until the projec-
tor temperature drops, then make sure that the intake and
exhaust vents are not blocked and turn on the projector.
(P32, P56)
The air filter is dirty. Check whether the air filter is clogged with dust.
If the air filter is clogged, clean or replace the air filter.
(P193)
205


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon WUX4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon WUX4000 in the language / languages: English as an attachment in your email.

The manual is 31,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info