543639
204
Zoom out
Zoom in
Previous page
1/240
Next page
Troubleshooting
204
There is no Sound
Connection with the input terminal
has not been performed correctly.
Check whether the AV equipment is connected to the pro-
jector input terminal correctly. (P47)
No input signal type has been
selected for the connected AV
equipment.
Check that the same input signal has been correctly
selected for the connected AV equipment from the [INPUT]
menu. (P60)
The input signal type is incorrect. Check whether the selected input signal type is correct.
(P94, P218)
The BLANK function has been
selected.
Press the BLANK button on the remote control. (P82)
No image is projected due to a
problem with the computer.
Turn first the projector and then the computer off and then
back on again.
The external monitor output is not
set on the notebook computer
correctly.
Turn on the external monitor output on the notebook com-
puter. To turn on the external monitor output, press the
[LCD] or [VGA] function key or a key with an icon for the
external monitor, while holding down the [Fn] key on the
keyboard of the notebook computer. With Windows 7, you
can turn on image output by holding down the Windows
logo key and pressing the [P] key. (P58)
The combination of keys used to perform this operation var-
ies depending on the model of notebook computer. For
more detailed information, refer to the manual that came
with your computer.
The displayed image is not the
same as that displayed on the
computer.
Check whether the dual screen (multi-display) mode is
selected on the computer. If the dual screen mode has
been selected, change it to the simultaneous display mode
on the computer.
The output setting method varies among computer manu-
facturers. For more detailed information, refer to the manual
that came with your computer.
Cause Countermeasure
The audio cable is not connected
correctly.
Check the audio cable connection. (P162)
The MUTE function is enabled. Press the MUTE button on the remote control. (P83)
The volume level is adjusted to
the minimum.
Press the VOL button on the remote control or the VOL+
button on the side control to adjust the volume level. (P83)
An audio cable with a built-in
resistor is used.
Use an audio cable without a built-in resistor.
Audio in terminal select is [Off]
(WX6000 / SX6000).
Change the Audio In terminal to the appropriate setting.
(P139)
Cause Countermeasure
204


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon WUX4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon WUX4000 in the language / languages: English as an attachment in your email.

The manual is 31,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info