683291
151
Zoom out
Zoom in
Previous page
1/193
Next page
Performing Operations and Settings in the Admin Viewer
151
6
Admin Viewer/VB Viewer
(1) [Haze Compensation]
[Auto]
Automatically uses Compensation Removal.
[Manual]
Use buttons in (2) to manually set the compensation
strength.
[Disable]
Disables Haze Compensation.
(2) Haze Compensation Strength
When Haze Compensation is [Manual], set one of the
7 levels from [1] (Mild) to [7] (Strong).
Note
When [Auto] or [Manual] is selected for [Haze Compensation],
the video data size increases.
When using [Haze Compensation], contrast may be strong if
the subject is not obscured by haze. If this happens, set [Haze
Compensation] to [Manual] and set a lower Haze
Compensation strength.
Setting the Focus
[Auto]
:Automatically focuses on the
subject.
[Manual] : You can adjust the focus manually
by pushing the (far) and
(near) buttons.
Clicking [One-shot AF] will use
autofocus to focus on a subject and
then stop in manual focus.
[Fixed at Infinity] : You can set the focus so that it is
fixed near infinity.
Setting the Exposure
(1) Exposure Mode
Select from [Auto], [Manual], [Auto (Flickerless)] or
[Auto (Shutter-priority AE)].
If [Auto] is selected for [Day/Night] under [Camera] in
the Setting page (p. 55), select [Auto], [Auto
(Flickerless)] or [Auto (Shutter-priority AE)].
[Auto]
The exposure is controlled automatically.
[Manual]
The exposure is set by adjusting the shutter speed,
aperture and gain values manually.
[Auto (Flickerless)]
In this mode, video flickering caused by fluorescent
lights, etc., can be reduced. The shutter speed is
automatically adjusted according to the brightness
of the environment in which the camera is used.
[Auto (Shutter-priority AE)]
In this mode, the desired shutter speed can be
specified.
Important
If you set [Smart Shade Control] to [Auto] or [Manual], [Haze
Compensation] is set to [Disable].
Important
If it is set in the Admin Viewer, the same focus mode will
occur in the viewers of other users also.
Depending on the lighting used, focus may not be
maintained when switching between [Day Mode] and [Night
Mode]. Focus when switching Day/Night Mode can be set in
the [Day/Night Mode Focus Settings] panel in the Admin
Viewer (p. 153).
Setting the shutter speed at [1/1 sec] in manual exposure
(p. 151) will disable the [Auto] and [One-shot AF] focus
modes in Control for Admin. Switch the focus to [Manual] and
adjust it to your subject.
Refer to the following for focus ranges.
Notes on p. 56
Notes on p. 40
Changes to focus mode in the Admin Viewer will not be
reflected in the settings on the setting page.
Note that if you set the focus manually it will remain fixed.
(1)
(2)
(3)
(5)
(6)
(7)
(4)
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-H730F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-H730F in the language / languages: English as an attachment in your email.

The manual is 8,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info