19958
38
Zoom out
Zoom in
Previous page
1/56
Next page
34
Troubleshooting
Troubleshooting Printed Output
Printer is not
responding
(continued)
Computer and/or
printer needs to
be reset
Reboot the computer and/or reset the printer.
To reboot the computer, close all open applications, then restart.
To reset the printer, unplug it, then plug it in again.
Faulty cable Replace the USB cable.
Printer tried
to print but
no ink on
paper
Ink tanks are not
seated properly
Check that the ink tanks have been firmly seated in the printhead, and
reseat the ink tanks if necessary. See “Replacing Ink Tanks” on
page 23.
Ink tanks may
need to be
replaced
One or both ink tanks may be low. See “Monitoring Ink Levels” on
page 21.
If necessary, replace the ink tanks. See “Replacing Ink Tanks” on
page 23.
Printhead
clogged or not
working properly
Verify that the printhead is working properly. See “Printing a Nozzle
Check Pattern” on page 25 or “Cleaning the Printhead” on page 27.
If necessary, perform multiple printhead cleanings. If print quality
does not improve, try deep cleaning. Perform printhead deep cleaning
from the printer driver.
If the problem persists, contact the Customer Care Center.
Problem Possible Cause Try This
Printed
output is
faded or
colors are
incorrect
Printhead is
clogged or ink
tank needs
replacing
1. Print a nozzle check pattern to determine if the printhead nozzles
are clogged. See “Printing a Nozzle Check Pattern” on page 25.
2. If the nozzles are clogged, you will need to clean the printhead.
See “Cleaning the Printhead” on page 27.
3. If print quality does not improve, try deep cleaning the printhead.
Perform printhead deep cleaning from the printer driver.
4. Replace one or both ink tanks. See “Replacing Ink Tanks” on
page 23.
If the problem persists, contact the Customer Care Center.
Incorrect Color
Adjustment
setting
W
INDOWS
1. On the Main tab of the S200 Properties window, confirm
that Color Adjustment is set to Auto.
2. If Manual is set, click the Defaults button on the Manual
Color Adjustment window.
Problem Possible Cause Try This
S200 QS.book Page 34 Tuesday, September 18, 2001 9:02 AM
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon S200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon S200 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info