37306
100
Zoom out
Zoom in
Previous page
1/128
Next page
98 Chapter 10
Troubleshooting
*1
To resume printing, you can press [OK] on the machine instead of selecting [Continue].
Waste tank (ink absorber) full This error message indicates that the waste ink absorber is nearly full.
The machine has a built-in waste ink absorber to hold the ink used
during FINE Cartridge cleaning, for example.
You can continue printing by selecting Continue
*1
on the display on
your camera.
However, because printing is disabled once the waste ink absorber
becomes completely full and until the waste ink absorber is replaced,
you are recommended to contact a Canon service representative as
early as possible.
No ink
z Prepare a new FINE Cartridge.
Select Continue
*1
in the display on your camera to resume printing.
z Replace the FINE Cartridge and close the Scanning Unit.
If printing is in progress and you want to continue printing, press
[OK] with the FINE Cartridge installed.
Then printing can continue under the ink out condition by selecting
Continue
*1
on the display on your camera.
Replace the empty FINE Cartridge immediately after the printing. The
machine may be damaged if printing is continued the ink out
condition.
z The FINE Cartridge may not be the compatible with this machine.
Install the appropriate FINE Cartridge.
Printer error An error requiring servicing might have occurred.
Disconnect the cable between the machine and the camera, turn OFF
the machine, and unplug the power cord of the machine from the power
supply. After a while, plug the power cord of the machine back in, turn
ON the machine, and then reconnect the camera to the machine. If the
same error occurs, contact a Canon service representative.
Error message on camera Action
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma MP170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma MP170 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info