34843
85
Zoom out
Zoom in
Previous page
1/100
Next page
Troubleshooting
81
z “PictBridge” or Canon “Bubble Jet Direct” compatible digital cameras can be
connected to your printer for direct printing.
z This section describes errors that are indicated on Canon-brand PictBridge-
or Bubble Jet Direct-compatible cameras. The error messages and operations
may vary depending on the camera you are using.
For errors on non-Canon PictBridge-compatible cameras, count the number of
flashes the P
P
OWER lamp on the printer makes and check for the cause of the
error and take the appropriate action. For details, see “H
H
andling Error
Messageson page 75.
z Connecting a digital camera not compatible with “PictBridge” or “Bubble Jet
Direct” makes the P
P
OWER lamp on your printer flash nine times. In such a
case, unplug the cable connecting the camera to the printer, and press the
RESUME/CANCEL button on the printer.
z A communication time out occurs if printing takes a long time or if it takes too
much time to send data. This may stop printing. In such a case, disconnect
the cable between the printer and the camera, press the R
R
ESUME/CANCEL
button on the printer, and reconnect the cable between the printer and the
camera. Then, turn the camera on, if it does not automatically turn on. If the
problem is still unresolved, select some other photo and check if it can be
printed or not.
z The print head nozzles may be clogged if printing becomes faint or colors are
incorrect. See “W
W
hen Printing Becomes Faint or Colors are Incorrecton page
48.
z If the paper is curled or its surface is scratched during printing, make sure
that you are using the correct type of paper. If this error occurs even when
you are using the correct type of paper, select P
P
revent paper abrasion on
Custom Settings in the printer driver. See “P
P
rint Quality is Poor or Contains
Errorson page 67.
z To disconnect the cable connected between the digital camera and printer,
follow the procedure below.
1. Disconnect the cable from the printer.
2. Turn off the digital camera.
3. Disconnect the cable from the digital camera.
When disconnecting the cable, be sure to hold the connector by its sides.
z For the errors indicated on the camera and their solution, also refer to the
user’s manual of the camera. For other troubles on the digital camera,
contact the manufacturer.
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma IP 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma IP 4000 in the language / languages: English as an attachment in your email.

The manual is 5,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Pixma IP 4000

Canon Pixma IP 4000 Quick start guide - English - 32 pages

Canon Pixma IP 4000 User Manual - German - 215 pages

Canon Pixma IP 4000 User Manual - Dutch - 211 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info