670856
63
Zoom out
Zoom in
Previous page
1/80
Next page
Menu Options
63
[Focus Control] [Camera], [Lens]
Determines the signal path used to adjust the focus.
[Camera]: Default setting for most cases.
[Lens]: You can adjust the focus using an accessory connected to the lens but
you will not be able to use the camera's autofocus functions or an optional
RC-V100 Remote Controller connected to the camera to adjust the focus.
[Tele-converter] [8x], [4x], [2x], [Off]
Allows you to digitally increase the focal length of the camera by a factor of
approx. 2, 4 or 8. Note that the image is digitally processed so the image will
deteriorate throughout the zoom range.
[EF-S Lens] [On], [Off]
When this setting is set to [On], reduces the peripheral illumination fall-off or
vignetting that may occur when using an EF-S lens with this camera. However,
the image is digitally enlarged by a factor of approx. 1.04 so the image will
deteriorate slightly.
[ABB] [Cancel], [OK]
Starts the procedure to adjust the black balance automatically (A 22).
[Color Bars] [Activate] [On], [Off]
Turns color bars on/off.
[Type] [SMPTE], [ARIB] (when the system frequency is 59.94 Hz)
[EBU], [SMPTE] (when the system frequency is 50.00 Hz)
Selects the type of color bars. The default setting depends on the country/
region of purchase.
[Infrared] [On], [Off]
Turns infrared mode on/off (A 48).
[ND Mode] [Automatic], [Manual]
Determines how the ND filter is adjusted when the camera mode is set to
[Auto].
[Automatic]: The ND filter is adjusted automatically by the camera.
[Manual]: The ND filter can be adjusted manually (A 38).
[Periph.Illum.Corr.] [On], [Off]
When this setting is set to [On] and the camera has correction data for the
attached lens, it compensates for the darkening of the image's corners
(peripheral illumination drop) due to the lens's characteristics. If correction data
for the lens is not available, the setting will appear grayed out.
Note that depending on the shooting conditions, noise may appear in the
periphery of the image as a result of the correction. Also, the level of correction
will be lower the higher the gain level used.
Menu item Submenu / Setting options
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon ME200S-SH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon ME200S-SH in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info