670856
62
Zoom out
Zoom in
Previous page
1/80
Next page
Menu Options
62
[Shockless WB] [On], [Off]
When this setting is set to [On], makes the transition look smoother when the
white balance is changed.
[Iris Increment] [1/2 stop], [1/3 stop], [Fine]
Determines the aperture value increment used when adjusting the aperture. When
this setting is set to [Fine], the increments will be smaller than 1/3 stop.
[Zoom-Iris Correct.] [On], [Off]
If you are using a compatible lens*, when this setting is set to [On], the camera
will adjust the aperture as needed to keep the selected aperture value while
zooming. Because of this adjustment, the brightness of the image might
change slightly or you may hear the operation sound. When this setting is set
to [Off], the aperture will close gradually (the image will turn darker) as you
zoom but you will not hear the aperture's operation sound.
* Some EF lenses and CINE-SERVO lenses are not compatible with this
function.
[AF Mode] [One Shot], [Continuous (Always On)], [Continuous (Auto Off)]
Determines the autofocus mode (A 42).
[One Shot]: The camera focuses automatically one time.
[Continuous (Always On)]: The camera focuses continuously on a subject at the
center of the screen and adjusts the focus automatically.
[Continuous (Auto Off)]: The camera focuses automatically most of the time.
However, when shooting in dark surroundings with the camera mode set to
[Auto], the continuous AF function will be deactivated if the gain value reaches
a predetermined level to prevent unreliable focus operations. When continuous
AF has stopped working, [C. AF] will appear in gray.
This setting has no effect when the camera mode is set to [Manual].
[Focus Limit] [Activate] [On], [Off]
Turns the focus limit on/off (A 44).
[Far] [Set], [Reset], [Cancel]
Allows you to set the far end of the focus limit for the attached lens (A 44).
When a focus limit has not been set, [Limit Off] will appear on the submenu
screen.
[Set]: Saves the current focus position for the far end of the focus limit.
[Reset]: Clears the currently set focus position.
[Cancel]: Cancels the operation.
[Near] [Set], [Reset], [Cancel]
Allows you to set the near end of the focus limit for the attached lens (A 44).
When a focus limit has not been set, [Limit Off] will appear on the submenu
screen.
[Set]: Saves the current focus position for the near end of the focus limit.
[Reset]: Clears the currently set focus position.
[Cancel]: Cancels the operation.
Menu item Submenu / Setting options
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon ME200S-SH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon ME200S-SH in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info