709680
40
Zoom out
Zoom in
Previous page
1/85
Next page
40
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys
for navigating the picture.
Using the remote control
1. Press D.ZOOM +/- to display the Zoom bar.**
2. Press D.ZOOM + to magnify the center of the picture. Press the
key repeatedly until the picture size is suitable for your need.**
3. Use the directional arrows ( , , , ) on the remote control
to navigate the picture.
4. To restore the picture to its original size, press AUTO PC. You
can also press D.ZOOM -. When the key is pressed again, the
picture is further reduced until it is restored to the original size.
Using the OSD menu
1. Press MENU and then press / until the DISPLAY menu is highlighted.
2. Press
to highlight D.ZOOM and press OK/IMAGE. The Zoom bar is displayed.
3. Repeat steps 2-4 in the section of "Using the remote control" above. Or if you are using the projector
control panel, continue to the following steps.
4. Press on the projector repeatedly to magnify the picture to a desired size.
5. To navigate the picture, press OK/IMAGE to switch to the panning mode and press the directional
arrows ( , , , ) to navigate the picture.
6. Use the directional arrows ( , , , ) on the projector or remote control to navigate the picture.
7. To reduce size of the picture, press OK/IMAGE to switch back to the zoom in/out functionality, and
press AUTO PC to restore the picture to its original size. You can also press repeatedly until it is
restored to the original size.
**When the projector and computer are connected via USB, the function (Page UP/Page DOWN) which
operates the computer from the remote controller is set.
The picture can only be navigated after the picture is magnified. You can further magnify the picture
while searching for details.
Selecting the aspect ratio
The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV and computers are in
4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio.
With the advent of digital signal processing, digital display devices like this projector can dynamically
stretch and scale the image output to a different aspect than that of the image input signal.
To change the projected image ratio (no matter what aspect the source is):
1. Press MENU and then press / until the DISPLAY menu is highlighted.
2. Press
to highlight Aspect.
3. Press / to select an aspect ratio to suit the format of the video signal and your display
requirements.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LX-MW500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LX-MW500 in the language / languages: English as an attachment in your email.

The manual is 6,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon LX-MW500

Canon LX-MW500 User Manual - German - 92 pages

Canon LX-MW500 User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info