709680
39
Zoom out
Zoom in
Previous page
1/85
Next page
39
ENGLISH
Correcting keystone
Keystoning refers to the situation where the projected image becomes a trapezoid due to angled
projection.
To correct this, besides adjusting the height of the projector, you will
need to manually correct it following one of these steps.
Press / on the projector or remote control to display the
Keystone correction page. Press to correct keystoning at the
top of the image. Press to correct keystoning at the bottom of
the image. Press to correct keystoning at the left side of the
image. Press to correct keystoning at the right side of the image.
Using the OSD menu
1. Press MENU and then press / until the DISPLAY menu is
highlighted.
2. Press to highlight Keystone and press OK/IMAGE. The
Keystone correction page is displayed.
3. Press to correct keystoning at the top of the image or press
to correct keystoning at the bottom of the image. Press to
correct keystoning at the left side of the image. Press to
correct keystoning at the right side of the image.
You can correct the vertical and horizontal keystones. However, their adjustment ranges are
limited in such correction.
When the keystone adjustment is carried out, the adjustment value is indicated. Note that this
value doesn’t mean a projection angle.
The allowable range of the adjustment value in the keystone adjustment varies depending on
the installation conditions.
Images may not be projected in a shape of a regular rectangle or with its aspect ratio 4:3,
depending on the installation conditions of the projector and the screen.
When the keystone adjustment takes effect, the resolution decreases. In addition, stripes may
appear or straight lines may bend in images with complicated patterns. They are not due to
product malfunctions.
Noise may appear on the screen during the keystone adjustment because of the type of the
video signal being projected and the setting values of the keystone adjustment. In such cases,
set the keystone adjustment values in the range where the image is displayed without noise.
When the keystone adjustment is carried out, the image may not be displayed correctly
because of the type of input signal.
Correcting corner distortion
This function allows you to correct each distorted image corner to get a perfect
rectangular image. You can manually adjust four corners of the image by setting
the horizontal and vertical values.
1. Press MENU and then press / until the DISPLAY menu is
highlighted.
2. Press to highlight Corner Adjustment and press OK/IMAGE. The
Corner Adjustment correction page is displayed.
3. Press / / / to select one corner and press OK/IMAGE.
4. Press / to adjust vertical values.
5. Press / to adjust horizontal values.
6. After one corner is adjusted, press MENU to return to the Corner Adjustment correction page.
7. You can press / / / to select another corner and repeat step 4-7 to make more adjustments.
Press /.
Press /.
Press /.
Press /.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LX-MW500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LX-MW500 in the language / languages: English as an attachment in your email.

The manual is 6,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon LX-MW500

Canon LX-MW500 User Manual - German - 92 pages

Canon LX-MW500 User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info