Manual Canon LV-X320 (page 21 of 80) (English)

615747

Zoom out

Zoom in

1/80

ENGLISH

How to determine the position of the projector for a given screen size

1. Select your image size.

2. Refer to the table and find the closest match to your image size in the left columns labeled "Image

size". Using this value, look across this row to the right to find the corresponding average distance

from screen value in the column labeled "Distance from the screen: L". This is the projection

distance.

3. On that same row, look across to the right column and make note of the "Hd" value. This will

determine the final vertical offset placement of the projector in relation to the edge of the image.

4. The recommended position for the projector is aligned perpendicular to the horizontal center of the

screen, at the distance from the screen determined in step 2 above, and offset by the value determined

in step 3 above.

LV-X310ST: If you are using a 4:3 aspect ratio, 100-inch screen, distance from the screen is 1.23 m and

with a vertical offset of 22.9 cm.

If you place the projector in a different position (to that recommended), you will have to tilt it down or up

to center the image on the screen. In these situations, some image distortion will occur. Use the Keystone

function to correct the distortion. See "Correcting keystone" on page 36 for details.

How to determine the recommended screen size for a given distance

This method can be used for situations where you have purchased this projector and would like to know

what screen size will fit in your room.

The maximum screen size is limited by the physical space available in your room.

1. Measure the distance between the projector and where you want to position the screen. This is the

projection distance.

2. Refer to the table and find the closest match to your measurement in the distance from the Image size

column. If the min and max values are available on the table, check that your measured distance is

between the min and max distances listed on either side of the average distance value.

3. Using this value, look across that row to the left to find the corresponding "Image size". That is the

projected image size of the projector at that projection distance.

4. On that same row, look across to the right column and make note of the "Hd" value. This will

determine the final placement of the screen in relation to the horizontal plane of the projector.

LV-X310ST: If your measured projection distance was 1 m and your screen aspect ratio is 4:3, the closest

match in the "Distance from the screen: L" column is 0.99 m. Looking across this row shows that a 80-

inch screen is required.

After my projector fell off a desk, the zoom control has become loose. Any help please? Submitted on 28-3-2023 at 16:03
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Canon LV-X320 in the language / languages: English as an attachment in your email.

The manual is 6,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon LV-X320

Canon LV-X320 User Manual - German - 88 pages

Canon LV-X320 User Manual - Dutch - 85 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Canon LV-X320 Manual

Product: