615747

Canon LV-X320 Manual

20
Zoom out
Zoom in
Previous page
1/80
Next page
20
Obtaining a preferred projected image size
The distance from the projector lens to the screen, the zoom setting (if available), and the video format
each factors in the projected image size.
4:3 is the native aspect ratio of LV-X320/LV-X310ST. To be able to project a complete 16:9 (widescreen)
aspect ratio image, the projector can resize and scale a widescreen image to the projector's native aspect
width. This will result in a proportionally smaller height equivalent to 75% of the projector's native aspect
height.
Thus, a 16:9 aspect image will not utilize 25% of the height of a 4:3 aspect image displayed by this
projector. This will be seen as darkened (unlit) bars along the top and bottom (vertical 12.5% height
respectively) of the 4:3 projection display area whenever displaying a scaled 16:9 aspect image in the
vertical center of the 4:3 projection display area.
16:10 is the native aspect ratio of LV-WX320/LV-WX310ST. To be able to project a complete 16:9
(widescreen) aspect ratio image, the projector can resize and scale a widescreen image to the projector's
native aspect width. This will result in a proportionally smaller height equivalent to 90% of the projector's
native aspect height.
Thus, a 16:9 aspect image will not utilize 10% of the height of a 16:10 aspect image displayed by this
projector. This will be seen as darkened (unlit) bars along the top and bottom (vertical 5% height
respectively) of the 16:10 projection display area whenever displaying a scaled 16:9 aspect image in the
vertical center of the 16:10 projection display area.
The projector should always be placed horizontally level (like flat on a table), and positioned directly
perpendicular (90° right-angle square) to the horizontal center of the screen. This prevents image
distortion caused by angled projections (or projecting onto angled surfaces).
The modern digital projector does not project directly forward (like older style reel-to-reel film projectors
did). Instead, digital projectors are designed to project at a slightly upward angle above the horizontal
plane of the projector. This is so that they can be readily placed on a table and will project forward and
upwards onto a screen positioned so that the bottom edge of the screen is above the level of the table (and
everyone in the room can see the screen).
You can see from the diagram on page 23, that this type of projection causes the bottom edge of the
projected image to be vertically offset from the horizontal plane of the projector.
If the projector is positioned further away from the screen, the projected image size increases, and the
vertical offset also increases proportionately.
When determining the position of the screen and projector, you will need to account for both the projected
image size and the vertical offset dimension, which are directly proportional to the projection distance.
When fine streaks are seen on projected images
This is due to interference with the screen surface and is not a mal-function. Replace the screen or
displace the focus a little.
4:3 aspect image in a 4:3 aspect display
area
16:9 aspect image scaled to a 4:3 aspect
display area
4:3 aspect image in a 16:10 aspect display area 16:9 aspect image scaled to a 16:10 aspect
display area
… 20 …


Need help? Post your question in this forum.

Forumrules
1

Forum

canon-lv-x320

Reset search

  • After my projector fell off a desk, the zoom control has become loose. Any help please? Submitted on 28-3-2023 at 16:03

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LV-X320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LV-X320 in the language / languages: English as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon LV-X320

Canon LV-X320 User Manual - German - 88 pages

Canon LV-X320 User Manual - Dutch - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info