Manual Canon lv 5220 (page 43 of 64) (English)

214372

Zoom out

Zoom in

1/64

Setting

Logo PIN code lock Dialog Box

Quit

Pointer

Enter a Logo PIN code

Select a number by pressing the Point 7 8 button and fix the

number with the SET button. The number will change to "✳". If

you fixed a wrong number, move the pointer to "Set" or "Clear"

once by pressing the Point

button, then return to "Logo PIN

code". Enter the correct number again.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, the pointer will automatically

move to "Set". Press the SET button so that you can change the

Logo PIN code lock setting.

If you entered a wrong Logo PIN code, "Logo PIN code" and the

number (✳✳✳✳) will turn red and disappear. Enter a correct Logo

PIN code all over again.

After a correct Logo PIN code is entered, the

following dialog box will appear.

Select On/OFF by pressing the Point 7 8 button or

change the Logo PIN code.

Change the Logo PIN code

Logo PIN code can be changed to your desired four-digit number.

Select "Logo PIN code change" with the Point

button and press

the SET button. Set a new Logo PIN code.

Be sure to note the new Logo PIN code and keep it at hand.

Logo PIN code lock

This function prevents an unauthorized person from changing the

Logo setting.

Off . . . . .the Logo setting can be changed freely from the

Logo menu. (p44)

On . . . . . .the Logo setting cannot be changed without the

Logo PIN code.

If you want to change the Logo PIN code lock setting, enter a

Logo PIN code along the following steps. The initial Logo PIN code

is set "4321" at the factory.

Logo PIN code lock

Display

This function decides whether to display On-Screen Displays.

On . . . . . . . shows all the On-Screen Displays.

Off . . . . . . . does not show On-Screen Displays except;

● On-Screen Menu

● “Power off?” message

● P-Timer

● “No signal” message

● ”Wait a moment!” message

Blue back

When this function is “On,” the projector produces a blue image

while input signal is not detected.

Setting

✔Note:

If you forget your Logo PIN code and unable to change it, the Logo P IN code can be

reset to the factory default setting (4321) according to the following procedures.

When you reset the Logo PIN code, the PIN code and Key lock will be reset, as well.

1. Disconnect the AC Power Cord from the AC outlet.

2. As pressing the SET button on the projector, connect the AC Power Cord into an

AC outlet again. Keep pressing the SET button until the POWER indicator lights.

The Logo PIN code will be returned to the factory default setting while the Logo PIN

code lock state will remain the same as previous set state.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Canon lv 5220 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Canon lv 5220 Manual

Product: