809442
119
Zoom out
Zoom in
Previous page
1/135
Next page
Troubleshooting
119
File name error
- The folder and file numbers have reached their maximum value. Set [Recording Setup] >
[MP4 Clip / Photo Numbering] to [Reset] and initialize the SD card (A29).
Initialize only using the camcorder
- Initialize the SD card with this camcorder (A29).
May not be possible to record movies on this memory card
- You may not be able to record clips on an SD card without a Speed Class rating or with a rating
lower than recommended. To record clips with a resolution of 3840x2160 or using slow & fast
motion recording, use an SD card rated UHS Speed Class U3. To record other clips, use an SD
card rated SD Speed Class 6 or 10, or UHS Speed Class U1 or U3.
Memory card cover is open
- After inserting an SD card, close the SD card compartment cover.
Memory card is full
- The SD card is full. Delete some recordings (A93) to free some space or replace the SD card.
Memory card is write-protected
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of
the LOCK switch.
No clips
- There are no clips on the SD card selected.
No memory card
- Insert a compatible SD card into the camcorder (A27).
No photos
- There are no photos to play back.
Operation canceled
- Cannot access the SD card. Check the SD card and make sure it is working correctly and
inserted correctly.
- An SD card error occurred. The camcorder cannot record or display the image. Try removing
and reinserting the SD card, or use a different SD card.
Recording was stopped due to insufficient write speed of the memory card
- The write speed of the SD card was too slow so recording was stopped. To record clips with a
resolution of 3840x2160 or clips using slow & fast motion recording mode, use an SD card that
is rated UHS Speed Class U3. To record other clips, use an SD card rated SD Speed Class 6 or
10, or UHS Speed Class U1 or U3.
- After repeatedly recording, deleting and editing clips (fragmented memory), it will take longer to
write data on the SD card and recording may stop. Save your recordings (A99) and initialize
the SD card (A29).
Some clips could not be deleted
- Clips that were protected/edited with other devices and then transferred to an SD card
connected to the computer cannot be deleted with this camcorder.
Task in progress. Do not disconnect the power source.
- The camcorder is updating the SD card. Wait until the operation ends and do not disconnect
the USB power adapter or remove the battery pack.
Too many photos and MP4 movies. Disconnect the USB cable.
- Disconnect the USB cable. Try using a card reader or decrease the combined number of MP4
clips and photos on the SD card to fewer than 2,500 (Windows), or 1,000 (macOS).
- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and
restore the connection after a short while.
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Legria HF-G70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Legria HF-G70 in the language / languages: English as an attachment in your email.

The manual is 4.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Legria HF-G70

Canon Legria HF-G70 User Manual - German - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info