809442
117
Zoom out
Zoom in
Previous page
1/135
Next page
Troubleshooting
117
Sound is distorted or is recorded at lower levels.
- When recording near loud sounds (such as fireworks, shows or concerts), sound may become
distorted or it may not be recorded at the actual levels. Activate the microphone attenuator
(A65), or adjust the audio recording level manually.
The picture is displayed correctly but there is no sound from the built-in speaker.
- Speaker volume is turned off. Adjust the volume (A92).
- During mode, sound from the built-in speaker will be muted if headphones are connected
to the camcorder.
SD Card and Accessories
Cannot insert the SD card.
- The SD card you are trying to insert is not facing the correct direction. Turn it over and insert it.
Cannot record on the SD card.
- A compatible SD card must be used (A27).
- Initialize the SD card (A29) when you use it with the camcorder for the first time.
- The SD card is full. Delete some recordings (A93) to free some space or replace the SD card.
The optional RC-V100 Remote Controller or commercially available remote control does not
work.
- Make sure that [System Setup] > [REMOTE Terminal] is set to [RC-V100 (REMOTE A)] when
using the optional RC-V100 Remote Controller or to [Standard] when using a commercially
available remote control.
- Turn off the camcorder, reconnect the remote controller and then turn the camcorder back on
again.
- When > [v% Camera Setup] > [/ Function] is set to [Off] or the currently
selected custom picture file is protected, detailed custom picture settings cannot be adjusted
using the RC-V100. Set [/ Function] to [On] after selecting a custom picture file that is not
protected (A80).
Connections with External Devices
Video noise appears on a nearby TV screen.
- When using the camcorder in a room where a TV is located, keep a distance between the USB
power adapter and the power or antenna cables of the TV.
Playback looks fine on the camcorder but there is no image on the external monitor.
-The camcorder is not connected correctly to the external monitor. Make sure the camcorder is
connected correctly (A97).
- The video input on the external monitor is not set to the video terminal to which you connected
the camcorder. Select the correct video input.
The camcorder is connected using the optional HTC-100 High Speed HDMI Cable, but there is
no picture or sound from the external monitor.
- Disconnect the High Speed HDMI cable and then restore the connection or turn the camcorder
off and then on again.
- The connected monitor is not compatible with the selected video configuration. Change the
video configuration to one that the monitor supports.
There is no image on the connected computer.
- The USB cable is connected to the camcorder’s DC IN terminal. Connect the USB cable to the
USB terminal.
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Legria HF-G70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Legria HF-G70 in the language / languages: English as an attachment in your email.

The manual is 4.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Legria HF-G70

Canon Legria HF-G70 User Manual - German - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info