55775
74
Zoom out
Zoom in
Previous page
1/89
Next page
74
Trouble?
Printing
Editing
Others
List of Messages
Problem Solution
The printer is not operating
even though the camcorder
and printer are correctly
connected.
Disconnect the USB cable and turn off the camcorder and the
printer. After a short while, turn them on again, set the
camcorder to mode and restore the connection.
Problem Solution
Cannot record with this
camcorder video input from an
external video device
connected to the HDV/TV
terminal using a DV cable.
Set [AV DV] to [OFF]. 31
Wrong signal standard. Dubbing may work using the AV IN/OUT
terminal.
Refer also to the instruction manual of the connected device.
Problem Solution
A rattling can be heard from the
camcorder.
The internal lens fixture can move when the camcorder is turned
off. This is not a malfunction.
Message Explanation/Solution
SET THE TIME ZONE,
DATE AND TIME
You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.
22
CHANGE THE BATTERY
PACK
Battery pack is exhausted. Replace or charge the battery pack. 16
THE TAPE IS SET FOR
ERASURE PREVENTION
Cassette is protected. Replace the cassette or change the position
of the protect switch.
78
REMOVE THE CASSETTE Camcorder stopped operating to protect the tape. Remove the
cassette and reinsert it.
17
CHECK THE HDV/DV
INPUT
(Appears only if a DV cable is
connected)
The DV cable is not correctly connected to the HDV/DV terminal, or
the connected digital device is turned off.
55
The video input signal is in a different television system (NTSC).
CONDENSATION HAS
BEEN DETECTED
Condensation has been detected in the camcorder. 80
CONDENSATION HAS
BEEN DETECTED
REMOVE THE CASSETTE
Condensation has been detected in the camcorder. Remove the
cassette.
80
TAPE END Tape reached the end. Rewind the tape or replace the cassette.
INCORRECT TAPE
SPECIFICATION
You attempted to play back a tape recorded in a different television
system (NTSC) or in a recording standard not supported by this
camcorder.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon HV10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon HV10 in the language / languages: English as an attachment in your email.

The manual is 5,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon HV10

Canon HV10 User Manual - German - 100 pages

Canon HV10 User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info