424242

Canon fax jx 500 Manual

70
Zoom out
Zoom in
Previous page
1/87
Next page
68 Troubleshooting
Documents Sent From the Fax are Spotted or Dirty
Cannot Send Using Error Correction Mode (ECM)
Errors Occur Frequently While Sending
z Receiving Problems
Cannot Receive a Document Automatically
There may be other documents being
sent from memory.
Allow time for those documents to finish sending.
An error may have occurred during
sending.
Print an activity report and check for an error (see page 53).
The telephone line may not be working
properly.
Make sure there is a dial tone when you press [Hook] or when you lift the
Handset. If there is no dial tone, contact your local telephone company.
The receiving fax machine may not be
a G3 fax machine.
Make sure the receiving fax machine is compatible with this fax machine (which
is a G3 fax machine).
Cause Action
The receiving fax machine may not be
working properly.
Check the fax by making a copy (see page 17). If the copy is clear, the problem
may be in the receiving fax machine. If the copy is spotted or dirty, clean the
scanner components (see page 62).
The document may not have been
loaded correctly into the Document
Tray.
Remove the document, stack it if necessary, and load it into the Document Tray
correctly (see page 15).
Cause Action
The receiving party’s fax machine may
not support ECM.
If the receiving party’s fax machine does not support ECM, then the document is
sent in normal mode without error checking.
ECM may be disabled. Make sure ECM is on (see ECM TX on page 50).
Cause Action
The telephone lines may be in poor
condition, or you may have a bad
connection.
Lower the transmission speed (see TX START SPEED on page 51).
Cause Action
The fax may not be set to receive
automatically.
For the fax to receive documents automatically, the receive mode must be set to
<FAX ONLY MODE>, <FAX/TEL AUTO SW> (Fax/Tel mode), <NET SWITCH>,
<ANS.MACHINE MODE> (see page 27), or <TAM MODE*> must be set (see
page 37). If you have set <ANS.MACHINE MODE>, check that an answering
machine is connected to the fax and that it is turned on with an outgoing
message properly recorded (see page 29).
The fax may have a document stored in
memory.
Print out any documents stored in memory (see page 35).
An error may have occurred during
reception.
z Check the LCD for an error message (see page 74).
z Print an activity report and check for an error (see page 53).
The Multi-Purpose Tray may be empty. Make sure paper is loaded in the Multi-Purpose Tray (see the Easy Setup
Instructions).
The telephone line may not be
connected properly.
Make sure all line connections are secure (see the Easy Setup Instructions).
* FAX-JX500/JX300 only.
Cause Action
… 70 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon fax jx 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon fax jx 500 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info