424035
97
Zoom out
Zoom in
Previous page
1/156
Next page
8-3
8
USING THE BUILT-IN ANSWERING MACHINE (TAM MODE) (FAX-EB15 only)
8
Setting TAM MODE allows you to receive telephone messages and fax transmissions while the fax is
unattended. When you cancel TAM MODE, any new telephone messages will be played automatically.
Follow the procedure below to set TAM MODE.
1
Press [TAM] to set TAM MODE.
When you set TAM MODE, the TAM LED lights up and the
outgoing message is played. When you cancel TAM MODE,
the TAM LED switches off. If you have any new telephone
messages, the messages are played automatically.
• To cancel TAM MODE, press [TAM] again.
NO OGM is displayed on the LCD when no outgoing message has been recorded. You must record an outgoing
message before you can set TAM MODE. (see p. 8-2)
A maximum of 50 messages, including an outgoing message, alternative message and voice memos, with a total
maximum recording time of 10 minutes can be recorded. You can set a maximum recording time of 120 seconds
for each telephone message. (see p. 8-4)
The date and time when the telephone message was recorded, the number of telephone messages and the number
of the message being played (ICM No.) are displayed whenever a message is played.
When TAM MODE is set and a call is received, the fax will respond as described below.
1
The fax will ring 2 or 5 times, when TOLL SAVER
is set to ON, depending on whether there are
any telephone messages. (see p. 8-5)
When TOLL SAVER is set to OFF, you can specify the number
of times the fax will ring.
2
The outgoing message is played to the other
party.
3
If the other party sends a fax after they leave a
message, or if the call is a fax call, the fax is
received automatically.
When the fax is set to MANUAL MODE and MAN/AUTO SWITCH has been set to OFF, TAM MODE will be
activated if the fax rings 15 times and the call is not answered. When the call is disconnected, the fax returns to
MANUAL MODE.
Setting TAM MODE
TAM MODE ON
Ex:
15:00 :00
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon fax eb10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon fax eb10 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info