423973
118
Zoom out
Zoom in
Previous page
1/138
Next page
Cannot receive using Error Correction Mode (ECM)?
Does the other party’s fax support ECM?
Some fax units do not support ECM transmission. If the other party’s fax
does not support ECM, the document is sent in the normal mode without
error checking.
Is your fax set for ECM receiving?
ECM receiving can be turned off and on. Check the current setting. See
p. 85.
Nothing prints?
Did you remove the orange tape from the BJ cartridge before you installed it
in the fax?
Be sure to remove the orange tape from the BJ cartridge before you install
it in the fax. See p. 11.
Make sure the BJ cartridge is installed correctly. See pp. 11 13.
Clean the print head several times. See p. 102.
Try another BJ cartridge.
Are the images you print blotched or uneven?
Are you using ECM sending/receiving?
ECM sending/receiving should eliminate such problems. However, if the
telephone lines are in poor condition, you may have to try again.
How is the quality of the other party’s fax?
Remember, the sending fax usually determines document quality. Be sure
the other party’s back of top cover and scanning glass are clean.
TELEPHONE
Cannot dial?
Is the telephone line connected to the fax?
Be sure the telephone line is correctly connected to the fax. See p. 14.
Is the fax set for the type of telephone line in use (pulse/tone)?
If you have a tone line, be sure the fax is set for tone dialling. If you are
not sure what type of line you have, contact your local telephone company.
See p. 16.
Does the phone disconnect while you are talking on the line?
Is AnsMode displayed on the LCD?
If AnsMode is displayed on the LCD, press [RECEIVE MODE] to select
a different mode. The Ans. Machine Mode should only be on when an
answering machine is connected, turned on, and ready to take messages
from telephone callers.
SOLUTIONS TO COMMON PROBLEMS
106
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon fax b 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon fax b 150 in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info