423973
116
Zoom out
Zoom in
Previous page
1/138
Next page
Frequently Asked Questions
Refer to this section if you experience trouble operating your fax.
TRANSMITTING
Cannot send a document?
Is the fax set for the type of telephone line in use (pulse/tone)?
If you have a pulse line, be sure the fax is set for pulse dialling. If you are
not sure about what type of line you have, contact your local telephone
company. See p. 16
Has the document been fed correctly into the fax?
Remove the document, stack it and feed it into the fax correctly. See p. 49.
Is the One-touch or Coded Speed Dialling number you used registered for the
feature you want to use?
Check the content of the One-touch or Coded Speed Dialling button and be
sure it was registered correctly. See pp. 36, 38.
Is the other party’s fax out of paper?
Call the other party and be sure paper is installed in the other party’s fax
unit.
Are there any other documents being sent from memory?
Allow time for the current document to finish sending.
Can you hear a dial tone when you press [HOOK] or when you lift the
handset?
If you cannot hear a dial tone, make sure the telephone line is connected
properly. See p. 14.
Print an activity report and check for an error code. See pp. 87, 110.
Are the images you send or copy spotted or dirty?
Is the document scanning glass clean?
If the scanning glass is dirty, clean it. See p. 100.
Is the other party’s fax working properly?
To confirm correct operation of your own fax, make a copy. If the copy is
clear, the other party’s fax may have a problem.
Is the document fed correctly into the Automatic Document Feeder (ADF)?
Remove the document and feed it correctly into the feeder. See p. 49.
Cannot send using Error Correction Mode (ECM)?
Does the other party’s fax support ECM?
Some fax units do not support ECM transaction. If the other party’s fax
does not support ECM transaction, then the document is sent in the normal
mode without error checking.
Is your fax set for ECM sending?
ECM sending for your fax can be turned off and on. Check the current
setting. See p. 85.
104
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon fax b 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon fax b 150 in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info