809437
227
Zoom out
Zoom in
Previous page
1/254
Next page
227
Troubleshooting
Network Functions
Along with this list, refer also to the instruction manuals of the access point or other external devices you are
using.
This photo cannot be displayed
- You may not be able to display photos taken with other devices or image files created or edited on a computer.
When [Slow & Fast Frame Rate] is set higher than 60 (fps), the Magnification function cannot be used.
- You attempted to use the magnification function with the sensor mode set to [Full Frame] or [Super 35mm (Cropped)]
and slow & fast motion recording activated with a shooting frame rate higher than 60. To use magnification, change the
sensor mode or set a shooting frame rate of 60 or lower.
With the current [Gamma/Color Space] settings, setting the main recording format to one of the 10 bit options is
recommended.
- The main recording format is set to one of the options using 8 bit color but the color space component of the [Gamma/
Color Space] setting in the custom picture file is set to [C.Gamut] or [BT.2020]. Using a 10 bit color bit depth is
recommended to fully realize the characteristics of the selected color space.
With the current combination of lens and mount adapter, some functions' performance may not be precise. Visit your
local Canon web site for details.
- With the current combination of lens and mount adapter used, the focal length and aperture value displayed by the
camera may not be accurate and should be considered only as a reference. Additionally, some functions may not work
as precisely.
A user with the same login name is already accessing the camera.
-This message appears on the screen of the connected device. Another device connected to the network is already
operating the camera. To use this device, first end the connection on the device accessing the camera.
Another device has set the same IP address.
- Another device on the same network has the same IP address as the camera. Change the IP address of the conflicting
device or the camera.
Another device with the same IP address already connected to the network.
- Another device on the same network has the same IP address as the camera. Change the IP address of the conflicting
device or the camera.
-When using a network with a DHCP server, if the camera’s IP address assignment is set to [Manual Setting], change it
to [Automatic Setting] (A171).
Connection refused by FTP server.
-The FTP server is set to allow connections only with specific IP addresses. Check the camera’s IP address (A171),
and add it to the FTP server’s permission list settings.
Error code returned from the FTP server for the data session.
-The FTP server terminated the connection. Restart the FTP server.
- Change the file access permission settings on the FTP server to allow reading, writing and accessing logs.
- Allow access permissions to the selected destination folder on the FTP server.
-Check that the FTP server is turned on and working properly.
-Check that there is enough available space on the storage device (hard disk drive, etc.)
Ethernet connection lost.
- You attempted to use an Ethernet (wired) network connection but the Ethernet cable is not connected. Check that the
Ethernet cable is correctly connected to the WFT-R10 Wireless File Transmitter and to the network device.
-Check that any network hubs, routers and servers are turned on and working properly.
File transfer completion was not confirmed by FTP server.
- The camera did not receive a transfer completion notification from the FTP server for an unknown reason. Turn the
camera and FTP server off and then on again and try the file transfer again.
Incorrect Wi-Fi password.
-Set the correct encryption key on the camera and the access point.
Multiple access points detected. Unable to connect. Retry from the beginning.
- Other Wi-Fi devices are using the WPS function (push button method) to connect. Try the operation again or use other
methods to configure the network (A169).
227


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS R5 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS R5 C in the language / languages: English as an attachment in your email.

The manual is 13.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS R5 C

Canon EOS R5 C User Manual - English - 797 pages

Canon EOS R5 C User Manual - German - 263 pages

Canon EOS R5 C User Manual - German - 815 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info