809437
228
Zoom out
Zoom in
Previous page
1/254
Next page
Troubleshooting
228
No address assigned by the DHCP server.
- The camera is set to automatic IP address assignment. If the selected network does not use a DHCP server, change
the camera’s IP address assignment to [Manual Setting] and configure the IP address (A171).
-Check the DHCP server.
•Check that the DHCP server is turned on and working properly.
•Make sure the DHCP server has enough IP addresses to assign.
-Check the network.
•Check if a router with an active gateway function is not being used on the network you are trying to connect to.
Set the correct gateway address on the camera and on all the devices connected to the same network.
Contact the networks administrator and obtain the correct gateway address. Enter the same address in the
camera’s network settings.
No connectable device found
-Check that Content Transfer Mobile is open.
-Check that the camera and the smartphone are connected to the same network.
No response from access point.
-Check that the access point is working properly.
- Refer to Precautions Regarding Wi-Fi Networks (A222) and check if there are applicable steps you can take.
No response from DNS server.
-The camera is set to automatic IP address assignment. If the selected network does not use a DNS server, change the
camera’s DNS address to [Disable] and configure the IP address (A171).
-Enter the same IP address of the DNS server used in the camera’s network settings.
-Check the DNS server.
•Check that the DNS server is turned on and working properly.
•On the DNS server, set the correct IP address and the name corresponding to the same address.
-Check the network.
•Check if a router with an active gateway function is not being used on the network you are trying to connect to.
Contact the networks administrator and obtain the correct gateway address. Enter the same address in the
camera’s network settings.
Set the correct gateway address on the camera and on all the devices connected to the same network.
No Wi-Fi network found with the selected SSID.
-Check the access point’s SSID (network name) and make sure the same name is used in the camera’s settings.
-Check that the access point is working properly and try again.
Security of server connection cannot be verified. To always trust this server and connect, set [Trust Destination
Server] to [Enable].
-Check that the necessary certificate is correctly configured.
-To trust and use this server even without the proper certificate, set [Trust Destination Server] to [Enable].
The camera's temperature is too high. Network connection terminated.
- The network connection has been lost because the internal temperature of the camera is too high. Turn off the camera
and let it cool down before using it again.
Unable to connect to access point.
- The camera’s encryption method is different from that of the access point. Change the settings on the camera to
match the access point.
Unable to connect to access point. Retry from the beginning.
- To configure a new network connection using the WPS function (push button method), refer to the access point’s
instruction manual and check how to activate the WPS function on the wireless router.
228


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS R5 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS R5 C in the language / languages: English as an attachment in your email.

The manual is 13.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS R5 C

Canon EOS R5 C User Manual - English - 797 pages

Canon EOS R5 C User Manual - German - 263 pages

Canon EOS R5 C User Manual - German - 815 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info