809437
167
Zoom out
Zoom in
Previous page
1/254
Next page
167
Configuring Connection Settings
IP Streaming
This section continues the connection settings wizard (A 165). In the function settings you will configure the
streaming video bit rate and resolution, the protocol used and the receiver’s settings. For details refer to the
instruction manual of the decoder device or software you will use.
1 Select [Create New Func. Setting].
Once you have added multiple function settings, you can select [Select Existing Setting] to reuse IP
streaming settings that you saved previously.
2 Select the desired protocol.
3 Configure the receivers settings. Select [Destination Server] and [Dest. Port No.] > [OK].
Enter the receiver’s IP address using the keyboard screen. Enter the port number using the data entry
screen (A 25).
Using the default port number is recommended.
Depending on the streaming protocol selected in step 2, perform step 4 if necessary and then continue to
step 5.
[RTP+FEC] streaming
4 Configure the settings used to send FEC packets. Select [FEC Port No.] and [FEC Interval] > [OK].
Enter the port number using the data entry screen (A 25).
Using the default settings is recommended.
[RTSP+RTP] streaming
4 Enter the user name and password of the RTSP client. Select [RTSP: User Name] and [RTSP: Password] >
[OK].
Enter the desired user name and password using the keyboard screen (A 25).
All streaming protocols
5 Select the video streaming configuration.
6 Select the audio channels.
7 Depending on the resolution and frame rate, a screen may prompt you to change other settings. Change the
settings as necessary.
8 Select [OK].
The function settings are saved to a [MODE] file.
9 Select the connection setting (SET1 to SET20) where to save the settings and then select [OK].
The camera will connect to the network and will be ready to start streaming.
10 Connect the decoder to the network and complete any necessary configurations on the receiving side so the
decoder is ready to receive video over IP.
To start streaming, refer to IP Streaming (A179).
Options for [Protocol]
[UDP]: This protocol prioritizes transfer speeds but does not guarantee the reliability/integrity of the
data. Lost or delayed IP packets are ignored.
[RTP]: Standard protocol for video/audio broadcasts over the Internet. Lost or delayed IP packets are
ignored.
[RTP+FEC]: This setting uses the RTP protocol and adds a layer of FEC error correction so the receiving
side* can recover lost or delayed IP packets.
[RTSP+RTP]: This setting uses the RTSP (real time streaming) protocol to control the streaming server
(camera) in real time and the RTP protocol for the broadcast over IP. With the RTSP protocol,
the receiver can control when to start and stop the broadcast.
* A decoder compatible with FEC error correction is required.
167


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS R5 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS R5 C in the language / languages: English as an attachment in your email.

The manual is 13.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS R5 C

Canon EOS R5 C User Manual - English - 797 pages

Canon EOS R5 C User Manual - German - 263 pages

Canon EOS R5 C User Manual - German - 815 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info