809437
165
Zoom out
Zoom in
Previous page
1/254
Next page
165
Configuring Connection Settings
Adding a New Connection Setting Using the Wizard
You can use the wizard to set up a new connection setting. This section uses a connection to a Wi-Fi network
using the WPS push button method as an example. Refer to the instruction manual of the access point for
details about the location and operation of the WPS button.
1 Enable the network functions (A164).
2Select > [ Network Settings] > [New Conn. Setting (Wizard)] > Desired network function >
[OK].
3Select [Create New Comm. Setting].
Once you have added multiple communication settings, you can select [Select Existing Setting] to reuse the
settings for a network that you saved previously.
4Select [Wi-Fi ].
To configure a wired (Ethernet) network (A169).
5Select [Connect with WPS] > [WPS (Push Button)].
To use a different configuration method, complete the corresponding procedure.
Camera Access Point (A169)
WPS using a PIN code (A170)
Detected access points (A170)
SSID/authentication mode input (A171)
Manual setup without connecting to the network (A171)
6Press and hold the WPS button on the wireless router and then, on the camera, select [OK].
7 To configure the IPv4 settings automatically and not use IPv6 settings, select [Automatic Setting] >
[Disable].
To configure IPv4 settings manually (A171).
To use the default IPv6 settings, select [Enable] instead. After completing the wizard, change the IPv6
settings as necessary (A175).
8Select [OK] to continue to configure the function settings.
The communication settings are saved to an [NW] file.
Continue with one the following procedures to configure the selected function’s settings.
FTP transfer (A166), IP streaming (A167), Browser Remote (A168), Canon App (A168)
NOTES
The [WPS (Push Button)] method may not work correctly depending on the devices used or the surrounding
conditions. In such case try using [WPS (PIN Code)] (A170) or selecting one of the detected networks
(A170).
165


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS R5 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS R5 C in the language / languages: English as an attachment in your email.

The manual is 13.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS R5 C

Canon EOS R5 C User Manual - English - 797 pages

Canon EOS R5 C User Manual - German - 263 pages

Canon EOS R5 C User Manual - German - 815 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info