809437
103
Zoom out
Zoom in
Previous page
1/254
Next page
103
Synchronizing with an External Device
Synchronizing with an External Device
You can use the camera’s TIME CODE terminal to synchronize this camera’s time code to an external signal.
Using the same external time code signal with multiple cameras allows you to set up a multi-camera recording.
You can also output the time code signal from this camera to other cameras.
Connecting an External Device
When synchronizing a time code signal, connect the external device to the TIME CODE terminal on the camera.
Be sure to set the TIME CODE terminal to input or output in advance.
Connection diagram
IMPORTANT
Commercially available DIN-BNC cables and the TIME CODE terminal
There are DIN cables with a long release mechanism (Fig. 1-A), and cables with a short release mechanism
(Fig. 1-B).
If you connect a cable with a short release mechanism to the TIME CODE terminal, it may not be possible to
disconnect it from the camera (Fig. 2). Use a cable with a release mechanism long enough to allow you to grip it
and pull to release even when it is connected to the camera.
Cable tested for use with this camera: Canare D2.5HDC***E-D (“***” indicates length)
For the latest information about DIN cables tested for use with this camera, visit your local Canon website.
Time Code Signal Input
An external SMPTE-standard LTC timing signal received from the TIME CODE terminal can be recorded as the
time code. The user bit of the external timing signal can also be recorded with clips. Before connecting the
device, set the TIME CODE terminal to input with the procedure below and make sure the time code running
mode is set to [Free Run] (A101).
Standard TC signal
TIME CODE terminal
DIN-BNC cable (commercially available)
Fig. 1
A
B
Release mechanism
Fig. 2
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS R5 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS R5 C in the language / languages: English as an attachment in your email.

The manual is 13.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS R5 C

Canon EOS R5 C User Manual - English - 797 pages

Canon EOS R5 C User Manual - German - 263 pages

Canon EOS R5 C User Manual - German - 815 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info