683260
222
Zoom out
Zoom in
Previous page
1/255
Next page
Troubleshooting
222
Audio cannot be recorded.
- The audio input selection switch of the INPUT terminal is in the AES/EBU position but an analog audio source is
connected, or it is set to the ANALOG position and a digital audio source is connected. Set the audio related switches
correctly according to the audio source you wish to use (A 110).
- The external analog microphone connected to the INPUT 1/INPUT 2 terminal requires phantom power. Set the
corresponding INPUT terminal’s ANALOG (analog audio source selection) switch to MIC+48V (A 110).
Audio is recorded at an extremely low level.
- The audio recording level mode for the audio channels selected is set to manual (M or [Manual]) and the audio
recording level is set too low. Check the audio level meter on the HOME screen, [AUDIO] screen or on the
monitoring screen and adjust the audio level correctly (A 111).
- The microphone attenuator is on. Turn off the microphone attenuator (A 113, 113).
Sound is distorted or is recorded at lower levels.
- When recording near loud sounds (such as fireworks, shows or concerts), sound may become distorted or it may not
be recorded at the actual levels. Activate the microphone attenuator (A 113, 113), or adjust the audio recording level
manually.
Recording Media and Accessories
Cannot insert the recording media.
- The CFast card or SD card you are trying to insert is not facing the correct direction. Turn it over and insert it.
Cannot record on the CFast card.
- A compatible CFast card must be used (A 48).
- Initialize the CFast card (A 51) when you use it with the camera for the first time.
- The CFast card is full or it already contains the maximum number of clips (999 clips). Delete some clips (A 147) to
free some space or replace the CFast card.
Cannot record on the SD card.
- A compatible SD card must be used (A 48).
- Initialize the SD card (A 51) when you use it with the camera for the first time.
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
- The SD card is full. Delete some recordings (A 147) to free some space or replace the SD card.
- The folder and photo numbers have reached their maximum value. Set the [Rec/Media Setup] > [Photo
Numbering] setting to [Reset] and insert a new SD card.
Recording to and playing back from a CFast card is slow.
- This may occur as video is recorded/deleted over time. Save your clips (A 161) and initialize the CFast card (A 51).
Recording to and playing back from an SD card is slow.
- This may occur as clips and photos are recorded/deleted over time. Save your recordings (A 161) and initialize the
SD card using the [Complete] option (A 51).
The optional RC-V100 Remote Controller or commercially available remote control does not work.
- Make sure that [System Setup] > [REMOTE Term.] is set to [RC-V100 (REMOTE A)] or [RC-V100 (REMOTE
B)] (depending on the connection used) when using the optional RC-V100 Remote Controller or to [Standard] when
using a commercially available remote control.
- Turn off the camera, reconnect the remote controller and then turn the camera back on again.
- When editing of the custom picture files detailed settings ([Other Settings] > [Activate]) is not enabled or the currently
selected custom picture file is protected, detailed custom picture settings cannot be adjusted using the RC-V100.
Select a custom picture file that is not protected (A 131) and enable the editing of the custom picture file’s detailed
settings (A 131).
222


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C700 FF PL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C700 FF PL in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C700 FF PL

Canon EOS C700 FF PL User Manual - German - 269 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info