683260
102
Zoom out
Zoom in
Previous page
1/255
Next page
Setting the Time Code
102
Setting the Time Code’s Initial Value
If you set the time code mode to [Preset], you can set the initial value of the time code.
1 Open the time code setting screen.
Setup screen: [SET TC]
Monitoring menu: [System Setup] (
B
) > [Time Code] > [Setting] > [Set]*
* To reset the time code to [00:00:00.00], select [Reset] instead.
The time code setting screen appears with an orange selection frame indicating the hours.
2 Set the desired time code using the keyboard screen (A 37).
Camera menu only: Press [RESET] to reset the time code to [00:00:00.00].
If the running mode is set to [Free Run], the time code will start running from the selected time code the
moment you confirm the time code.
Selecting Drop or Non-Drop Frame
When the frame rate is set to 29.97P, 59.94i, or 59.94P, you can select between a drop frame (DF) or non-drop
frame (NDF) time code, depending on how you plan to use your recordings.
With all other frame rates, the time code is set to non-drop frame (NDF) and cannot be changed.
1 Open the [DF/NDF] submenu.
Setup screen: [OPTIONS] > [DF/NDF]
Monitoring menu: [System Setup] (
B
) > [Time Code] > [DF/NDF]
2 Select [DF] or [NDF] and then press SET.
The time code display will differ depending on the setting. When you select [DF], the time code will appear
as [00:00:00.00]; when you select [NDF], it will appear as [00:00:00:00].
Putting the Time Code Display on Hold
If you set an assignable button to [Time Code Hold] (A 127), you can press the button to freeze the display of
the time code*. While the time code display is put on hold, [H] will appear next to the time code on the HOME
screen and at the bottom right corner of the monitoring screen.
The time code continues to run normally while the time code display is on hold. When you resume the time code
display, the current time code will be displayed.
* The time code signal output from the SDI OUT terminals, MON. terminals and TIME CODE IN/OUT terminal will not be put on
hold. However, the time code displayed on a monitor connected to the HDMI OUT terminal will be put on hold.
About the Time Code Display
A letter may appear next to the time code depending on the operation. Refer to the following table.
Letter Description
R The time code mode is set to [Regen.].
P The time code mode is set to [Preset] and the running mode is set to [Rec Run].
F The time code mode is set to [Preset] and the running mode is set to [Free Run].
E Time code signal is coming from an external source.
H Time code display is on hold.
None Time code during clip playback.
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C700 FF PL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C700 FF PL in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C700 FF PL

Canon EOS C700 FF PL User Manual - German - 269 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info