683260
101
Zoom out
Zoom in
Previous page
1/255
Next page
101
Setting the Time Code
Setting the Time Code
In shooting mode, the camera generates a time code signal and records it with the recorded clips. The time
code signal can be output from the SDI OUT terminals, MON. terminals and TIME CODE IN/OUT terminal. In
playback mode, the time code embedded in the clip being played back can be output from the SDI OUT
terminals and MON. terminals. You can also synchronize the camera’s time code with an external device
(A 106, 107).
Depending on the frame rate used, you may be able to select between a drop frame an non-drop frame time
code signal (A 102). The default mode varies depending on the country/region of purchase and, though the
time code display style is different for DF and NDF, in this section the NDF display style is used for simplicity’s
sake.
Selecting the Time Code Mode
1 Open the time code [Mode] submenu.
Setup screen: [OPTIONS] > [Mode]
Monitoring menu: [System Setup] (
B
) > [Time Code] > [Mode]
2 Select the desired option and then press SET.
Options
[Preset]: The time code starts from an initial value you can select in advance. The default initial time code
is 00:00:00:00.
See the following procedures to select the time code running mode and set the initial time code.
[Regen.]: The camera will read the selected recording media and the time code will continue from the last
time code recorded on the recording media. The time code runs only while recording so clips
recorded consecutively on the same recording media will have continuous time codes.
NOTES
NOTES
When the main recording format is set to [ProRes (CFast)] and a CFast card is not inserted in the camera, sub
recording clips will not be recorded even if an SD card is inserted in the camera. For this reason, when the time
code running mode is set to [Regen.], the last time code recorded on the SD card will not be read.
Setting the Time Code Running Mode
If you set the time code mode to [Preset], you can select the time code running mode.
1 Open the time code [Run] submenu.
Setup screen: [OPTIONS] > [Run]
Monitoring menu: [System Setup] (
B
) > [Time Code] > [Run]
2 Select the desired option and then press SET.
Options
[Rec Run]: The time code runs only while recording so clips recorded consecutively on the same recording
media will have continuous time codes.
[Free Run]: The time code starts running the moment you press SET and keeps running regardless of the
camera’s operation.
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C700 FF PL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C700 FF PL in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C700 FF PL

Canon EOS C700 FF PL User Manual - German - 269 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info