55722
33
Zoom out
Zoom in
Previous page
1/144
Next page
33
Basic Functions
Recording
E
Recording Still Images
1. Holding the lock button pressed
down, move the power switch to
CAMERA.
2. Move the / switch to the
(STILLS) position.
3. Open the LCD panel and the lens
cover (move the lens cover switch
down to ).
4. If necessary, change the media for
recording the still images using
the procedure described in the
next page ( 34).
You can record still images on the
memory card or the disc. The default
media for still images is the memory
card.
As long as you do not change the
recording destination, still images will be
recorded to the last selected media.
5. Press the PHOTO button halfway.
Once the focus is automatically adjusted, the camcorder will beep, the mark will
turn green and one or more green AF frames appear.
When you press the PHOTO button on the wireless controller, the still image is
recorded immediately.
6. Press the PHOTO button fully.
The mark and the AF frame(s) disappear and you hear a shutter sound.
Do not turn off the camcorder, change the position of the / switch,
disconnect the power source, open the memory card/disc cover or remove the
memory card/disc while the card access or the disc access indicator is flashing.
Doing so could result in data damage.
About the focusing frame:
This camcorder uses the 9-point artificial intelligence autofocus (9-point AiAF)
that will automatically select the best focusing frames out of nine available,
allowing you to focus on subjects even if they are not in the center of the picture
(51).
If the subject is not suitable for autofocus, turns yellow. Keep the PHOTO
button pressed halfway and adjust the focus manually with the omni selector
().
In step 5 above, the image may appear out of focus for a moment while the
camcorder is focusing.
Before using a memory card for the first time, be sure to initialize it with this camcorder
(95).
DC 20_10_PAL-E.book Page 33 Friday, September 2, 2005 6:36 PM
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon DC10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon DC10 in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info