55722
31
Zoom out
Zoom in
Previous page
1/144
Next page
31
Basic Functions
Recording
E
Basic Functions
Recording
Recording Movies
1. Holding the lock button pressed
down, move the power switch to
CAMERA.
2. Move the / switch to the
(MOVIES) position.
3. Open the LCD panel and the lens
cover (move the lens cover switch
down to ).
4. Press the start/stop button to
begin recording.
Press the start/stop button again to
pause recording.
During the recording and immediately
after pausing it, the disc access indicator
may go on while the scene is being
written on the disc.
When You Have Finished Recording:
1. Remove the disc.
2.
Close the LCD panel and the lens cover (move the lens cover switch to )
.
3. Turn off the camcorder.
4. Disconnect the power source.
Do not turn off the camcorder, change the position of the / switch,
disconnect the power source, open the memory card/disc cover or remove the
memory card/disc while the card access or the disc access indicator is flashing.
Doing so could result in data damage.
The process of recognizing a disc may take a moment. The display will
move while the disc is being read. Wait until the camcorder finishes recognizing
the disc before you start recording.
About the recording time: The recording mode is set by default as SP
(standard play). By changing the recording mode you can change the recording
time available on the disc ( 58).
When recording in bright places it may be difficult to use the LCD screen. In
such case, use the viewfinder instead.
When recording in very loud places (such as fireworks shows or concerts),
sound may become distorted or it may not be recorded at the actual levels. This
is not a malfunction.
Before You Begin Recording
Make a test recording first to check if the camcorder operates correctly. Since
recordings made on a DVD-R cannot be deleted, we recommend you use a DVD-RW
disc (commercially available) to make the test recordings.
DC 20_10_PAL-E.book Page 31 Friday, September 2, 2005 6:36 PM
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon DC10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon DC10 in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info