709431

Canon CR-S700R Manual

47
Zoom out
Zoom in
Previous page
1/56
Next page
5 Additional Information Troubleshooting
47
5 Additional Information
Troubleshooting
This section contains information about solving problems with the camera head. For information about troubleshooting
problems with the IP controller or web setup tool, refer to the CR-G100 instruction manual.
The ALARM indicator (A 12) illuminates.
The system switched to alarm status because the camera head’s internal temperature is too high. Turn off the robotic
camera system and wait until the temperature decreases to turn the system on again.
If that does not solve the situation, there may be a problem with the system. Consult a Canon sales representative.
The robotic camera system will not start.
Even if the power switch is set to ON, the STATUS indicator does not illuminate.
The external AC adapter may not be plugged in all the way into the DC IN 24V terminal. Turn off the system and
make sure the AC adapter is properly connected (A 36).
The camera head is not responding.
Check the connection status of all the devices in the Status screen of the web setup tool.
If the camera head is not recognized, check the connections between the camera head and IP controller
(A 35).
The camera head is not turning in the correct direction.
In the web setup tool, [Underslung mode] is not activated.
The system emits a strange sound outside the motion range.
Last time the camera head was used, the homing procedure was not performed using the web setup tool before
the system was turned off. Perform the homing procedure using the web setup tool.
The lens used was not selected on the web setup tool after the initial installation or after replacing the lens. Refer
to the CR-G100 instruction manual and select the lens used in the Robotic Camera Head Settings menu.
Motion range settings are ignored.
When adjusting the motion range limits in the web setup tool, you may not have clicked the [Save] button so the
new values were not correctly saved. Set the motion range limits again and click the [Save] button.
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CR-S700R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CR-S700R in the language / languages: English as an attachment in your email.

The manual is 5,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info