212803
51
Zoom out
Zoom in
Previous page
1/76
Next page
47
5
5.1 When the Scanner Is Not Recognized
Cause The same SCSI ID is used for other SCSI devices (when using
SCSI connections).
Remedy Check the SCSI ID of all connected SCSI devices, and make sure that
the same SCSI ID is not set for two or more devices. Reset the SCSI
IDs if the same SCSI ID is set. (See “Setting the SCSI ID,” on p.24.)
Cause Another SCSI device is valid as a terminator (when using SCSI
connections).
Remedy Cancel the SCSI device terminator that is connected between the
CR-180 and the computer. The CR-180 must be at the end of the
daisy chain, and all other SCSI devices in between the computer and
CR-180 must their terminators OFF. (See “Setting the SCSI ID,” on
p.24.)
Cause The scanner was turned ON after turning ON the computer (when
using SCSI connections).
Remedy Turn the computer and scanner OFF, turn ON the scanner, and then
turn ON the computer. (See “Turning ON and OFF the Power,” on
p.26.)
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon cr 180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon cr 180 in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info