779945
13
Zoom out
Zoom in
Previous page
1/28
Next page
11
137369 Rev 1.
EnglishSuperSix EVO - Owner’s Manual Supplement
1
2 N·m
2
2
NGLI-2
1
2
43
To replace:
Remove the rear axle.
Remove the mounting screw(s) and remove the old
hanger from the dropout. Clean the area around
the dropout and inspect the frame carefully for any
cracks or damage. If you find damage have the
frame inspected by your Cannondale Dealer .
If the dropout is un-damaged, apply a light film
of grease between the frame and mount. This
will help minimize any noise or “creaking” that
might result from very slight movement between
the dropout and mount during movement of the
derailleur.
Slide the new hanger onto the dropout. Apply
Loctite® 242 (or medium strength thread lock)
to the screw threads and tighten to the specified
torque.
Rear Derailleur Mount Front Derailleur Mount
1. RD Mount
2. Screw
1. FD Mount
2. FD cable
3. Frame Plug
4. Di2 Cable Plug
(DISC frame shown)
(Mechanical shift shown)
The front derailleur mount is bonded to the frame.
It is a “braze-on type.
Do not attempt to remove the mount.
When using a mechanical FD system or SRAM
Etap, make sure the frame plug is installed to
prevent the intrusion of water or debris into the
frame.
When using Di2 Systems, use the Di2 Cable Plug.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Super 6 Evo - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Super 6 Evo - 2020 in the language / languages: English as an attachment in your email.

The manual is 11.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Super 6 Evo - 2020

Cannondale Super 6 Evo - 2020 User Manual - English - 220 pages

Cannondale Super 6 Evo - 2020 Additional guide - German - 36 pages

Cannondale Super 6 Evo - 2020 User Manual - Dutch - 102 pages

Cannondale Super 6 Evo - 2020 Additional guide - Dutch - 36 pages

Cannondale Super 6 Evo - 2020 User Manual - French - 102 pages

Cannondale Super 6 Evo - 2020 Additional guide - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info