779945
11
Zoom out
Zoom in
Previous page
1/28
Next page
9
137369 Rev 1.
EnglishSuperSix EVO - Owner’s Manual Supplement
Bottom Bracket - PF30A / 73 mm
Maintenance
Have the bearings inspected annually, anytime the
crankset is removed, or if a problem is indicated.
With crankset removed, rotate the inner bearing
race of both bearings; rotation should be smooth
and quiet. Execessive play, roughness, or corrosion
indicates a damaged bearing.
Replacement
Bearings are not removable from the PF30 cup
systems pressed into the bottom bracket shell.
Therefore, both bearing and cup must be removed
together replaced as a new set.
Before installing any new bearing units into the
shell, thoroughly clean the inside surface of the
bottom bracket shell with a clean dry shop towel.
Also, make sure both bearing units and the BB shell
surfaces are clean and dry. Do not apply
grease.
To avoid serious damage to the frame, it is
important to remove bearing systems very carefully
using proper tools indicated by the manufacturer’s
service instructions. Make sure the bearings (cup
or adapter parts) are driven out squarely and evenly
from inside the shell! Do not pry components from
shell.
Follow the manufacturer’s instruction for assembly and
installation of the bearing system. Use a headset press
such as Park Tool HHP-2. See http://www.parktool.com/
product/bearing-cup-press-HHP-2.
Select appropriate press and adapters to ensure that
force is only applied to the cup and not the bearing
inside. Press until both cup anges are mated to the BB
shell edge.
NOTICE
Consult with your Cannondale Dealer
on the quality and compatibilty of any
proposed replacement component.
Do not use chemical solvents to clean. Do
not remove frame material or use surfacing
tools on bottom bracket shell.
Frame damage, caused by improper
components, component installation or
removal is not covered by your warranty.
46 mm
1
2
3
73
m
m
3
4
m
m
3
9
m
m
Identification
1. Frame BB Shell
2. PF30 Cup
3. Bearing
(Cross-section)
DRIVE SIDE NONDRIVE SIDE
(Side view, Drive side, no bearings)
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Super 6 Evo - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Super 6 Evo - 2020 in the language / languages: English as an attachment in your email.

The manual is 11.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Super 6 Evo - 2020

Cannondale Super 6 Evo - 2020 User Manual - English - 220 pages

Cannondale Super 6 Evo - 2020 Additional guide - German - 36 pages

Cannondale Super 6 Evo - 2020 User Manual - Dutch - 102 pages

Cannondale Super 6 Evo - 2020 Additional guide - Dutch - 36 pages

Cannondale Super 6 Evo - 2020 User Manual - French - 102 pages

Cannondale Super 6 Evo - 2020 Additional guide - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info