779945
191
Zoom out
Zoom in
Previous page
1/220
Next page
191
PART 3
(E) Lefty Type
8. Install Front Wheel
Cannondale Bicycle Owner’s Manual
For shipping, the through axle will be
threaded into the fork dropouts or be in the
small parts box. Pick up the through axle and
note the orientation of the two ends. One
end is threaded, will thread into a female
threaded hole in the right dropout. One end
is made to be turned with an allen wrench or
has a built-in lever to turn it.
Lift the fork and position the front wheel
under the fork. First align the brake rotor (the
shiny disc attached to the wheel) with the
brake caliper (the part mounted to the fork).
As you lower the fork, carefully position the
wheel so that the brake rotor fits into the slot
in the brake caliper. Next lower the fork
further and align the hub axle ends with the
fork dropouts.
Be sure that the axle at both ends of the hub
is fully engaged with the dropouts on the
fork. Push down on the front of the bike and
hold the bike upright. When fully and
properly engaged you will see that the wheel
is centered in the fork, that there is the same
amount of space between the tire and the
inside of the fork on both sides.
Push the through axle through the hole in the
left dropout and the hole in the axle. When
you feel resistance stop pushing. Begin
threading, with an allen wrench or the
built-in lever. You will see and feel the
through axle threading into the threads in
the right dropout until it stops turning.
There will be one or two pinch bolts in each
of the dropouts. Tighten these bolts.
Torque Pinch bolts and through axle to
torque values marked on the fork.
(E) Lefty Type
Lefty is a proprietary Cannondale single
sided fork. The Lefty fork has a spindle onto
which a special Lefty specific front wheel
fits. A captive bolt attaches the wheel and is
self-extracting to remove the wheel. With
Lefty, the brake caliper must be detached for
wheel removal.
For your safety and to optimize the
performance of your Lefty suspension fork
and bike, please find and read the StopLock
instructions attached to the fork and the
separate Lefty suspension fork owner’s
manual supplement included with your bike.
191


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Super 6 Evo - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Super 6 Evo - 2020 in the language / languages: English as an attachment in your email.

The manual is 12.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Super 6 Evo - 2020

Cannondale Super 6 Evo - 2020 Additional guide - English - 28 pages

Cannondale Super 6 Evo - 2020 Additional guide - German - 36 pages

Cannondale Super 6 Evo - 2020 User Manual - Dutch - 102 pages

Cannondale Super 6 Evo - 2020 Additional guide - Dutch - 36 pages

Cannondale Super 6 Evo - 2020 User Manual - French - 102 pages

Cannondale Super 6 Evo - 2020 Additional guide - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info