779945
189
Zoom out
Zoom in
Previous page
1/220
Next page
189
PART 3
(C) Through Axle Type
8. Install Front Wheel
Cannondale Bicycle Owner’s Manual
Remove the disc brake shipping spacer from the caliper. This is a brightly colored plastic spacer
used with hydraulic disc brakes. After the spacer is removed, before the wheel is installed, do
not pull the front brake lever. If you accidentally pull the front brake lever the brake pads will
need to be pushed outwards to allow the wheel to be installed.
Lift the fork and position the front wheel under the fork. First align the brake rotor (the shiny disc
attached to the wheel) with the brake caliper (the part mounted to the fork). As you lower the
fork, carefully position the wheel so that the brake rotor fits into the slot in the brake caliper.
Next lower the fork further and align the hub axle ends with the fork dropouts.
Be sure that the axle at both ends of the hub is fully engaged with the dropouts on the fork. Push
down on the front of the bike and hold the bike upright. When fully and properly engaged you will
see that the wheel is centered in the fork, that there is the same amount of space between the
tire and the inside of the fork on both sides.
Push the through axle through the hole in the left dropout and the hole in the axle. When you feel
resistance stop pushing. Begin threading, with an allen wrench or the built-in lever. You will see
and feel the through axle threading into the threads in the right dropout until it stops turning.
Torque to torque value marked on the through axle. This part must be very tight.
189


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Super 6 Evo - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Super 6 Evo - 2020 in the language / languages: English as an attachment in your email.

The manual is 12.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Super 6 Evo - 2020

Cannondale Super 6 Evo - 2020 Additional guide - English - 28 pages

Cannondale Super 6 Evo - 2020 Additional guide - German - 36 pages

Cannondale Super 6 Evo - 2020 User Manual - Dutch - 102 pages

Cannondale Super 6 Evo - 2020 Additional guide - Dutch - 36 pages

Cannondale Super 6 Evo - 2020 User Manual - French - 102 pages

Cannondale Super 6 Evo - 2020 Additional guide - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info