804898
170
Zoom out
Zoom in
Previous page
1/220
Next page
170
PART 3
STEP 6. Installing the Handlebar And Stem
138690 Rev2 (10/22)
Assembling Your Bike
Cannondale Bicycle Owner’s Manual
Set up handlebar and brake lever angle:
With the faceplate bolts still just snug (if necessary, loosen slightly to allow adjustment):
Center handlebar in the stem. Most handlebars have aiming marks.
Rotate to set brake lever angle.
On a mountain bike or flat bar road bike (A), most riders like the brake levers at a 45-degree
angle with the ground.
On a road bike with drop bars (B), most riders like the handlebar set where the flat area at the
top or the bottom of the handlebar is parallel to the ground.
Final tightening of stem faceplate bolts:
1. When you like the handlebar position, tighten the faceplate bolts (2 or 4) as evenly as possible;
alternating in a crisscross pattern so that the gap between the stem and faceplate is equal –
top/bottom, left/right.
2. Using a torque wrench and the correct size bit, tighten all faceplate bolts to the torque value
marked on the stem faceplate. If no torque marking is present, tighten to 7Nm.
170


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Moterra Neo 2021 - Shimano E7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Moterra Neo 2021 - Shimano E7000 in the language / languages: English as an attachment in your email.

The manual is 12.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Moterra Neo 2021 - Shimano E7000

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - English - 24 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - English - 30 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - German - 24 pages

Cannondale Moterra Neo 2021 - Shimano E7000 User Manual - German - 102 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - German - 30 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - Dutch - 24 pages

Cannondale Moterra Neo 2021 - Shimano E7000 User Manual - Dutch - 102 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - French - 24 pages

Cannondale Moterra Neo 2021 - Shimano E7000 User Manual - French - 102 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info