804898
168
Zoom out
Zoom in
Previous page
1/220
Next page
168
PART 3
STEP 6. Installing the Handlebar And Stem
138690 Rev2 (10/22)
Assembling Your Bike
Cannondale Bicycle Owner’s Manual
Method A: Stem is attached to steering tube:
Confirm that the fork and handlebar stem face forward.
Remove the stem faceplate. Remove the 2 or 4 bolts holding the faceplate on the stem using a
4mm or 5mm hex wrench. Set the faceplate and bolts within easy reach.
Rotate the handlebar so cables/housings run properly. The rear shifter should be on the riders
right hand side. Holding bars against the front end of stem, secure the faceplate over the bars.
Install one bolt first to hold the assembly in place. Then install all faceplate bolts through the
faceplate and into the stem. Most handlebars have markings that make it easier to center the
handlebars. Just snug the bolts enough to hold the assembly in place.
Check for proper cable/housing orientation. Consult photos and our assembly videos.
The right brake lever controls the rear brake. The rear brake housing will run from the right brake
lever around the left side of the head-tube and into the cable stop.
The left brake lever controls the front brake. The front brake housing will run from the left brake
lever forward and down towards the front brakes.
The two derailleur housings will run along side the headtube and into the cable housing stops
near the front of the frame. Be sure that the housing ends are inside the cable housing stops.
See below:
168


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Moterra Neo 2021 - Shimano E7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Moterra Neo 2021 - Shimano E7000 in the language / languages: English as an attachment in your email.

The manual is 12.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Moterra Neo 2021 - Shimano E7000

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - English - 24 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - English - 30 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - German - 24 pages

Cannondale Moterra Neo 2021 - Shimano E7000 User Manual - German - 102 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - German - 30 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - Dutch - 24 pages

Cannondale Moterra Neo 2021 - Shimano E7000 User Manual - Dutch - 102 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - French - 24 pages

Cannondale Moterra Neo 2021 - Shimano E7000 User Manual - French - 102 pages

Cannondale Moterra Neo 2021 - Shimano E7000 Additional guide - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info