804914
39
Zoom out
Zoom in
Previous page
1/220
Next page
39
PART 1
3. Removing And Installing Wheels
Section 4. Tech
Cannondale Bicycle Owner’s Manual
(2) With the steering fork facing forward,
insert the wheel between the fork blades
so that the axle seats firmly at the top of
the fork dropouts. The cam lever, if there
is one, should be on rider’s left side of the
bicycle (fig. 8a & b). If your bike has a
clip-on type secondary retention device,
engage it.
(3) If you have a traditional cam action
mechanism: holding the cam lever in the
ADJUST position with your right hand,
tighten the tension adjusting nut with
your left hand until it is finger tight
against the fork dropout (fig. 8a). If you
have a cam-and-cup system: the nut and
cup (fig. 8b) will have snapped into the
recessed area of the fork dropouts and
no adjustment should be required.
(4) While pushing the wheel firmly to the top
of the slots in the fork dropouts, and at
the same time centering the wheel rim in
the fork:
(a) With a cam action system, move the cam
lever upwards and swing it into the
CLOSED position (fig. 8a & b). The lever
should now be parallel to the fork blade
and curved toward the wheel.
To apply enough clamping force, you
should have to wrap your fingers around
the fork blade for leverage, and the lever
should leave a clear imprint in the palm
of your hand.
(b) With a through-bolt or bolt-on system,
tighten the fasteners to the torque
specifications in Appendix D or the hub
manufacturer’s instructions.
NOTE:
If, on a traditional cam action system, the
lever cannot be pushed all the way to a
position parallel to the fork blade, return
the lever to the OPEN position. Then turn
the tension adjusting nut
counterclockwise one-quarter turn and
try tightening the lever again.
(5) With a through-bolt or bolt-on system,
tighten the fasteners to the torque
specifications in “PART II Tightening
Torques” or the hub manufacturer’s
instructions.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Canvas Neo 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Canvas Neo 2020 in the language / languages: English as an attachment in your email.

The manual is 12.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Canvas Neo 2020

Cannondale Canvas Neo 2020 Additional guide - English - 24 pages

Cannondale Canvas Neo 2020 User Manual - German - 102 pages

Cannondale Canvas Neo 2020 Additional guide - German - 24 pages

Cannondale Canvas Neo 2020 User Manual - Dutch - 102 pages

Cannondale Canvas Neo 2020 Additional guide - Dutch - 24 pages

Cannondale Canvas Neo 2020 User Manual - French - 102 pages

Cannondale Canvas Neo 2020 Additional guide - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info